Making Calls; Dialing A Number Directly From The Endpoint - RADVision SCOPIA XT4000 Series User Manual

5

Making Calls

You can make a video call on the SCOPIA XT Series in several ways. This chapter outlines how
to dial to other endpoints in different modes, and how to answer and end a call.

Dialing a Number Directly from the Endpoint

This section describes how to dial a number from the endpoint itself. You can also do this
remotely, from the SCOPIA XT Series web interface (see
XT Series Web Interface" on page
From your endpoint, you can dial a number in the following ways:
Once you dial a new number it is added to the list of recent calls. The system allows you to
view the last 100 calls. These icons appear next to a contact number or name:
Procedure
Step 1
Step 2
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.1
•
Dialing a Number Directly from the Endpoint ........................................... page 44
•
Dialing a Number from the SCOPIA XT Series Web Interface ......................... page 47
•
Answering and Ending a Video Call ....................................................... page 48
•
Changing the Video Layout During the Call ............................................. page 49
•
Using the XT Remote Control Unit
•
Dialing a contact in the phone book (to add a contact to the phone book, see
Adding and Modifying Contacts in the Phone Book" on page
•
Dialing a number from the recent calls list
•
— Received call
•
— Dialed call
•
— Missed call
Access the endpoint's Main menu.
Select the number you want to call in one of the following ways:
"Dialing a Number from the SCOPIA
47).
"Remotely
18)
Making Calls | 44