_________________________________________________________________________________
2.2
In-Ceiling Mount Installation (430 521 Model)
①
Remove the ceiling tile from the
ceiling and cut a hole whose
diameter is 110mm on the ceiling
tile to pass the wires and cables
through to the upside of ceiling.
③
Align the dome cover stud with the
dome cover assembly stud and
slightly push the dome cover to the
ceiling tile.
Important Notice
Before starting the installation, make sure that the Camera ID and Protocol are
set up properly.
② Connect the wiring and cabling and
attach the camera to the ceiling tile.
(Tapping M4 16).
④ Turn the dome cover clockwise and
screw on the dome cover lock-up screw.
Then remove the protection vinyl from
the dome cover. (Machine M3 6)
24