Osd Display - LEGRAND 430 521 Instruction Manual

3.10

OSD Display

 P/T/Z Information
 Camera ID
 Action Title
 Preset Label
 Alarm Information
Displays the amount of pan from zero degree vertical, the amount
of tilt from zero degree horizontal and current compass
direction. Also identifies the amount of the zoom magnification.
Displays the selected Camera ID (Address).
Identfies Actions
"SET PRESET xxx"
"PRESET xxx"
"PATTERN x"
"SWG /PRESET xxx"
"UNDEFINED"
Displays preset labels when the camera arrives at presets.
Displays activated alarms. This information shows current state
of Alarm Inputs and Relay Outputs. If an Input point is ON
state, it will show a number corresponding to each point. If an
Input point is OFF state, '-' will be displayed.
Example: The point 2 & 3 of inputs are ON and Output is ON, OSD
will show as below.
When Preset xxx is memorized.
When the camera reaches Preset xxx.
When Pattern x is in action.
When Swing x is in action. Displays both of
Swing number and Preset number.
When a undefined function is called to run
51