Swing Setup - LEGRAND 430 521 Instruction Manual

4.8

Swing Setup

[1~8]

Swing
Selects a Swing number to edit. If the selected Swing is not defined, "NOT USED"
Numbe
is displayed in the 1st Position and the 2nd Position.
r
[PRESET 1~128]
 1st
Sets the 2 positions for a Swing function. If the selected preset is not
Posit
defined, "UNDEFINED" is displayed as shown below.
ion
2nd
Posit
ion
When a swing function runs, the camera moves from the preset assigned as the 1st
point to the preset assigned as the 2nd point in CW(Clockwise) direction. Then
the camera moves from the preset assigned as the 2nd point to the preset
assigned as the 1st point in CCW (Counterclockwise) direction. In case that the
preset assigned as the 1st point and the preset assigned as the 2nd point are
same or only 1 Preset position is assigned, the camera turns on its axis by 360
in CW direction and then it turns on its axis by 360 in CCW direction.

[1 /sec. ~180 /sec.]
Swing
Defines Swing speed between the 2 Preset positions from 1 /sec to 180 /sec
Speed
[CANCEL/OK]

Clear
Deletes the data of the selected Swing.
Swing
Runs Swing for the test purposes to check if it works properly.
 Run
Swing
69