Group Setup - LEGRAND 430 521 Instruction Manual

4.10

Group Setup

 Group Number
 Clear Group
 Run Group
 Edit Group
Group Edit
1) Press Near key when the cursor is at " NO" to start editing the selected Group.
2) Note that MAX. 20 actions are allowed in a Group. Move the cursor up/down to select
an Action. Press Near key to edit.
[1~8]
Selects a Group number to edit.
If the selected Group number is not defined, "UNDEFINED" will
be displayed under the selected Group number.
[CANCEL/OK]
Deletes the data of the selected Group.
Runs the Group for the test purposes to check if it works
properly.
Edit the selected Group.
71