In-Ceiling Mount Installation (4 305 21 Model) - LEGRAND 4 305 21 User Manual

2.2 In-Ceiling Mount Installation (4 305 21 Model)

①
Remove the ceiling tile from the ceiling and cut a
hole whose diameter is 110mm on the ceiling tile to pass
the wires and cables through to the upside of ceiling.
③
Align the dome cover stud with the dome cover
assembly stud and slightly push the dome cover to the
ceiling tile.
Important Notice
Before starting the installation, make sure that the Camera ID and Protocol are set up properly.
②
Connect the wiring and cabling and attach the
camera to the ceiling tile. (Tapping M416).
④
Turn the dome cover clockwise and screw on the
dome cover lock-up screw. Then remove the protection
vinyl from the dome cover. (Machine M36)
19