Main Part Description - LEGRAND 430 521 Instruction Manual

Main Part Description (430 523 Model)
DIP Switch
 Dome Cover
 DIP Switch
 Mounting Hook
 Mounting Screw Hole
 Main Connector
 Sensor I/O Port
Mounting Hook
Main Body / Terminal Cover
Do not detach the protection vinyl from the dome cover
before finishing all the installation process to protect
the dome cover from scratches or dust.
Used to set up camera IDs and protocols.
Used to assemble the main body with wall mount bracket or
ceiling mount bracket. Insert the mounting hooks into the
holes on the surface of the main body and turn the main
body.
Used to assemble the main body with a bracket with
screws.
Used for the power wire, the video cable and the RS-485
communication cable connection.
Used for the sensor in/out connection.
Mounting Screw Hole
Main Connector
Sensor I/O Port
Dome Cover
15