Preset Setup - LEGRAND 430 521 Instruction Manual

4.7

Preset Setup

 Preset Number
 Clear Preset
 Edit Preset
Scene
 Edit Preset
Label
 Relay Out
 CAM Adjust
[1~128]
Selects a preset number to set up. If a selected preset is already
defined, the camera moves to the pre-defined position and preset
parameters such as Label and CAM Adjust show on the monitor. If a
selected preset is not defined, " UNDEFINED " shows on the
monitor.
[CANCEL/OK]
Deletes the data of the selected Preset.
Re-defines the scene position of the selected Preset.
Edits the label of the selected Preset to show on the monitor when
the preset runs. MAX. 10 alphanuberic characteristics are allowed.
Defines the relay output.
[GLOBAL/LOCAL]
WB(White Balance) and AE(Auto Exposure) can be set up
independently for each preset. There are 2 modes, "Global" mode &
"Local" mode. The Global mode is that WB and/or AE are/is set up
totally and simultaneously for all presets. The Global parameter
setup such as WB and AE can be done in "ZOOM CAMERA SETUP" menu.
The Local mode is that WB and/or AE are/is set up independently or
separately for each preset. The Local parameter setup for WB and
AE can be done in each preset setup menu. Each Local parameter
such as WB and AE activates correspondingly when the camera
arrives at each preset position. During jog operation, Global
WB/AE value should be applied. All Local WB/AE values do not
change although Global WB/AE value changes. The Local mode has the
prior to the Global mode.
65