6.1 Cleaning the Printer
Cleaning periodically and the cleaning tool
Periodical cleaning: every 3 months or every 300 working hours once
Cleaning tool: dry cloth (please use soft cloth to clean metal parts)
Cleaning the spare parts
Clean the oily spare parts of the printer with dry cloth.
Cleaning the paper feed path
Wipe off the wasted paper and clean the dirt and dust.
Cleaning the photoelectric sensor part
As the paper sensor is a correlation photoelectric sensor. You should clean the parts periodically.
Clean the shield of the sensor every three months.
Note: 1. Turn off the printer and pull out the power cord before cleaning.
2. Print head and the surrounding part may be high temperature after using. Please
avoid cleaning it at the moment.
3. Don't use hard cloth or combustible solvent to clean the printer.
6.2 Error Message on the Control Panel
When the malfunction occurs, the printer will be off-line and give an alarm through LEDs as shown
below:
PAPER OUT
ERROR LED
Blink fast
On
On
Blink slowly
6.3 Contact the Technical Service Center
If malfunction occurs and you cannot solve the problem through the operation shown in 6.2, the
components of the printer are damaged during using or you need to buy some consumables, please
contact the authorized technical service centre.
CODESOFT PL-330 User's Manual
Chapter 6 Printer Maintenance
Reason
LED
Off
Auto cutter error
Off
Cover is open
On
Paper out
Print
Off
overheated
Restart the printer and the auto-cutter will return
to the home position automatically. If the
problem is still unsolved, please contact the
Customer Service Center for maintenance.
Close the cover and press it tightly.
head
Resume working after it cools.
- 55 -
Solution
Reinstall the paper.
Need help?
Do you have a question about the PL-330D and is the answer not in the manual?