Important Safety Instructions - Code Soft PL-330D User Manual

Read all of these instructions carefully and thoroughly and save them for later reference. The
unauthorized operation would lead to malfunction or accident. Manufacturers have no
responsibilities for the problems which are led by unauthorized operations.
1. Follow all warnings and instructions in the manual as well as marked on the product.
2. Don't touch the thermal print head with your hand at any moment to avoid the thermal head damaged.
3. Be careful the manual cutter when you are installing the paper.
4. Unplug this product from the power outlet before cleaning. Do not use the chemicals like alcohol to
clean the printer. Use a damp cloth for cleaning.
5. Please don't use the printer near water.
6. Slots and opening on the cabinet and the back or bottom are provided for ventilation. To ensure reliable
operation of the product and to protect it from overheating, do not block or cover these openings. And
do not place the printer on a bed, sofa, rug or other similar surface in case of blocking the
openings.This product should not be placed in a crowded environment unless proper ventilation is
provided.
7. Make sure the printer is put on a stable surface and the surrounding is wide enough for paper load and
eject.
8. Avoid using the same AC socket with other high-power electric appliances or the electric appliance
device which will easily cause voltage fluctuation.
9. The whole computer system should be far away from the devices which may easily cause
electromagnetic interference, for example, loudspeaker or wireless component.
10. Do not locate this product where the cord will be stepped on. When the cord or the plug is mangled,
please stop using and get a new one replaced. Make sure the old one is far away from the printer, so it
can avoid someone who does not know the inside story getting damaged.
11. This product should never be placed near or over a radiator or heat origin, and should avoid of direct
sunshine.
12. Never push objects of any kind into this product though cabinet slots as they may touch dangerous
voltage dots or short out parts.
13. Don't remove the printer's out-cover and repair the printer. When needed, call or take it to the
professional.
14. Make sure the power is off before connecting or unplugging the power cord and the cables.
15. To ensure safety, please unplug this product prior to leave it unused for an extended period. The wall
outlet you plan to connect to should be nearby and unobstructed.
16. Unplug this product from the power outlet and leave servicing to qualified service personnel under the
following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when the operating instructions are followed.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance, it indicates a need for service.
Note: The contents of this manual are subject to change without notice.
*All the parts of the printer can be recycled. When it is abandoned, we can call it back freely.
Please contact us when you abandon it.
Note: In order to ensure the printer life, strictly prohibit printing full line and full black
exceeding 2 CM.
CODESOFT PL-330 User's Manual

Important Safety Instructions

- iii -