Code Soft PL-330D User Manual page 38

4.5 When the "Select Print Service" interface pops up, select "System Print Service", as shown in
Figure 29.
4.6 Select "Wireless Printer@10.10.10.1", as shown in Figure 30.
4.7 Make sure the printer and the corresponding printing parameters are correct, click "Print", as
shown in Figure 31.
4.8 The system sends print data to the printer, when the printer finishes receiving, a prompt "Print job
completed!" will be shown, as shown in Figure 32.
CODESOFT PL-330 User's Manual
Figure 29
Figure 31
- 32 -
Figure 30
Figure 32