Code Soft PL-330D User Manual page 25

(1) Printer-equipment connected printing
Printer-equipment connected printing is a way of printing which uses printer as the hotspot and
connects the wireless equipment for printing.
"Wireless Settings" is the relevant setting parameter when the printer is as the hotspot (as shown in
Figure 6). In the printer-equipment connected printing mode, the parameters of the wireless equipment
must match that of the printer so as to make the communication successful. Please record the relevant
parameters and fill them in the wireless equipment correctly.
After you finish resetting the parameters in the setting column, click "Apply" on the upper side of
"Update Firmware". Then the countdown interface of saving the modification appears and the wireless
equipment can conduct communications with the printer as soon as the countdown is over.
Description in "Wireless Settings"
BSSID: The address of the printer wireless card in the "Wireless Settings", which is the MAC address
(Valid when it's in printer-equipment connected printing).
Network Name (SSID): The network name of the printer wireless card. You can modify it if necessary,
IP Address: The IP address of the printer wireless card. You can modify it if necessary, but you need to
enter the browser with the new IP after modifying.
Subnet Mask: The subnet mask of the printer wireless card. You can modify it if necessary.
CODESOFT PL-330 User's Manual
Figure 6
but you have to connect the network again after modifying.
- 19 -