Code Soft PL-330D User Manual page 44

9) Return to "Additional Port Information Required", click "Next".
10) A window of "Completing the Add Standard TCP/IP Printer Port Wizard" pops up, click "Finish".
11) In the window of "Install Printer Software", click "Have Disk".
12) A window of "Install From Disk" pops up. Please according to the operating system environment,
such as Windows 2000/XP/Vista/Win7 operating system you should select the path as follows:
CD-ROM → "Drivers" → "WIN2000 (XP-Vista-Win7)", click "Open", then click "OK" to return to the
window of "Install Printer Software", click "Next".
13) Follow the guide and click "Next" gradually till the installation is finished. At this time, printer
network driver is installed completely.
2. Upgrade-install printer network driver (setting driver's network port)
If PC has installed the printer's driver, set driver's network port to carry out network printing. The
concrete steps are shown below:
1) Click "Start" → "Settings" → "Select Printers".
2) Right click CODESOFT PL-330 driver, click "Properties" on the window popping up.
3) A window of "Properties" pops up; click "Ports" and "Add Port".
4) A window of "Printer Ports" pops up, select "Standard TCP/IP Port", click "New Port".
CODESOFT PL-330 User's Manual
- 38 -