Ocp Problems - HP StorageWorks ESL E-Series User Manual

OCP problems

Table 11
Table 11: OCP problems
The OCP is blank.
The OCP does not
respond to buttons.
An error message is
displayed.
ESL E-Series Tape Library User's Guide
describes corrective actions for OCP problems.
Problem Corrective Action
Confirm that power is on.
Use Command View TL software or the Interface
Manager's command line interface to check for errors
on the OCP.
Use Command View TL software or the Interface
Manager's command line interface to check for errors
on the OCP.
Contact an authorized field service engineer.
Write down the details of the error message, including
the SK, ASC, and ASCQ numeric values. Look up the
code and try the suggested recovery procedures.
Press Ok to clear the message.
Maintenance and Troubleshooting
87