HP StorageWorks ESL E-Series User Manual page 150

Sense Data Values
Table 24: Sense data values (Hexadecimal) (Continued)
Sense
Key ASC ASCQ
5 3A
5 3B
5 3B
5 4E
150
00
MEDIUM NOT PRESENT
The inventory indicated that a cartridge was in this bin but no cartridge
was sensed by the picker when it attempted to pick it. It may also
indicate that the tape is not ready to be picked from the drive because
the tape is not fully unloaded.
Retry the command.
Check for proper seating of the cartridge.
0D
MEDIUM DESTINATION ELEMENT FULL
Destination element address already contains a cartridge.
Re-inventory the cabinet and retry the move command using your
application software.
If the problem recurs, run the
followed by a cabinet inventory, and retry the move command
using your application software.
0E
MEDIUM SOURCE ELEMENT EMPTY
Source element address does not contain a cartridge.
Re-inventory the cabinet and retry move command using your
application software.
If the problem recurs, run the
followed by a cabinet inventory, and retry the move command
using your application software.
00
OVERLAPPED COMMANDS ATTEMPTED
Due to a second command being sent from the same host before a
previous command has completed, the previous command has been
aborted. This may also occur when executing off-line commands via the
control panel and DIAG port simultaneously.
Verify that the host software application is supported, has
up-to-date patches, and is correctly configured.
Verify that the library and its components have the current
firmware.
Message Name/Description
Robotics to Home Position
Robotics to Home Position te
ESL E-Series Tape Library User's Guide
test
st