HP StorageWorks ESL E-Series User Manual page 34

Library Overview
The Interface Manager card is located in drive cluster 0 to the right of the cluster
controller card (see
1
Figure 11: Interface Manager card
Note:
permanent software licenses. For more information, refer to the documentation that
shipped with the Interface Manager and Command View TL software kit. Details are
also available at http://www.hp.com/support/cvtl.
Note:
diagnostics and management by accessing devices through a LAN infrastructure. For
more information on Command View TL, go to http://www.hp.com/support/cvtl.
Note:
access devices across a FC infrastructure. For more information on L&TT, go to
http://www.hp.com/support/tapetools.
The Interface Manager communicates with the management station over the LAN.
The management station is a Microsoft
the Command View TL software. Ideally, the management station should have a
static IP address and be dedicated for use with the Interface Manager and
Command View TL software.
34
Figure
Interface manager card
Additional advanced SAN security and management features are available via
Command View TL, provided with your library, is a utility that provides
HP StorageWorks Library and Tape Tools (L&TT) is a diagnostic utility that can
11).
Cluster controller card
2
®
Windows-based PC (server) that hosts
ESL E-Series Tape Library User's Guide
1
2