HP StorageWorks ESL E-Series User Manual page 79

For example, if a library has 25 full slots and a sequential slot test is set to run 50
times, the library will test slots 1-25, then begin at 1 again and test through 25. If
you set the same library to run the sequential slot test 60 times, it will test 1-25,
1-25, then 1-10.
To access the
displays the
Figure 33: Diagnostics screen
To perform a diagnostic test:
1. Take the library off-line.
2. Use the up and down arrows to select the diagnostic test to perform and press
ESL E-Series Tape Library User's Guide
Diagnostics
Diagnostics
a. Press the OPS button on the OCP to access the Operations screen.
b. Select Cabinet.
c. Use the up and down arrows to take the library off-line.
d. Press Back to return to the main screen.
Select
.
Diags
screen, press
screen (see Figure 33).
Library Operations
Home
from the screen. The OCP
79