Table 17: Common Interface Manager issues (Continued)
Symptom
Interface
Manager card
does not detect
drives or library
ESL E-Series Tape Library User's Guide
Possible Cause
SCSI cables not
Check cabling connections.
connected
properly
SCSI settings or
termination not
set properly
Timing issues
Reset the corresponding FC interface
controller.
Drive not
powered on or
in ready state
Maintenance and Troubleshooting
Solution
Check the SCSI settings for the device.
Check that the SCSI bus is properly
terminated and ensure the terminator
LEDs indicate a normal state (green).
Make sure the drive isn't set to off.
Troubleshoot the drive.
95