HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM User Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Storage
  5. STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM
  6. User manual
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM User Manual

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM User Manual

All-in-one storage system
Hide thumbs Also See for STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, Instruction and Installation Manual
HP StorageWorks
All-in-One Storage System

user guide

Part number: 440583-005
First edition: February 2008

Advertisement

Table of Contents
loading

Related Manuals for HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM

Summary of Contents for HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM

  • Page 1: User Guide

    HP StorageWorks All-in-One Storage System user guide Part number: 440583-005 First edition: February 2008...
  • Page 2 U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.

  • Page 3: Table Of Contents

    Installing the All-in-One Storage Manager Agent ................33 Installing the All-in-One Storage Manager Agent on network application servers ......33 2 Storage system components ............... 35 HP StorageWorks 400r All-in-One Storage System ............... 35 HP StorageWorks 400t All-in-One Storage System ................ 37 All-in-One Storage System...
  • Page 4 HP StorageWorks 600 All-in-One Storage System ................. 40 SAS and SATA hard drive LEDs ....................43 3 Storage management overview ............45 Storage management elements ....................45 Storage process management example ................. 45 Physical storage elements ....................46 Arrays ........................47 Fault tolerance ......................
  • Page 5 Accessing the Virtual Library Wizard ..................68 Configure your virtual library ..................68 Allocating space for components ....................69 Selecting advanced configuration settings ................71 Selecting data protection ......................76 Reviewing task summary and scheduling tasks ................78 Monitoring task completion status ....................79 Cancelling tasks .........................
  • Page 6 Single Instance Storage ..................... 123 Search enhancements ....................... 124 File Server Resource Manager .................... 124 Windows SharePoint Services .................... 124 HP All-in-One Management Console ................... 124 File services management ......................125 Configurable and pre-configured storage ................125 Storage management utilities ..................... 126 Array management utilities ..................
  • Page 7 More information ......................154 B Print services .................. 155 Microsoft Print Management Console ..................155 New or improved HP print server features .................. 155 HP Web Jetadmin ......................155 HP Install Network Printer Wizard ..................155 HP Download Manager for Jetdirect Print Devices ..............155 Microsoft Print Migrator Utility ....................
  • Page 8 Troubleshooting ........................160 Additional references for print services ..................160 C Microsoft Services for Network File System (MSNFS) ......161 MSNFS Features ........................161 UNIX Identity Management ....................161 MSNFS use scenarios ......................162 MSNFS components ......................162 Administering MSNFS ....................163 Server for NFS ......................
  • Page 9 BSMI notice ........................186 Japanese notice ....................... 186 Korean notice A&B ......................186 Class A equipment ..................... 186 Class B equipment ..................... 186 Safety ........................... 187 Battery replacement notice ....................187 Taiwan battery recycling notice ..................187 Power cords ........................187 Japanese power cord notice ....................
  • Page 10 Figures Internet options screen ..................... 25 HP StorageWorks 400r All-in-One Storage System front panel ........35 HP StorageWorks 400r All-in-One Storage system rear panel ........36 AiO400t front panel (bezel on) ................. 38 AiO400t front panel (bezel off) ................. 39 AiO400t rear panel ....................

  • Page 11: All-In-One Storage System

    File and Print Services for NetWare dialog box ............175 New User dialog box .................... 176 NetWare Services tab ................... 177 Automatic configuration settings ................181 Proxy server settings ....................182 All-in-One Storage System...
  • Page 12 Installation and Configuration checklist ..............20 AiO Configurations ....................22 Server configuration steps ..................30 HP StorageWorks 400r All-in-One Storage System front panel components ..... 35 HP StorageWorks 400r All-in-One Storage System rear panel components ..... 36 AiO400t front panel components (bezel on) ............... 38 AiO400t front panel components (bezel off) ...............
  • Page 13 Virtual Library Properties ..................105 Operating status: General tab ................106 Storage tab: HP All-in-One Storage System logical disk properties ....... 107 Storage tab: HP All-in-One Storage System volume properties ........107 Operating status: Application server volume properties ..........109 Storage tab: Application server volume properties .............

  • Page 15: About This Guide

    HP StorageWorks 400t All-in-One Storage System • HP StorageWorks 600 All-in-One Storage System This guide is available on the HP web site and is also provided as a PDF document on the HP StorageWorks All-in-One Storage System documentation CD. Intended audience This guide is intended for use by network and IT professioinals who are experienced with the following: •...

  • Page 16: Rack Stability

    Convention Element • GUI elements that are clicked or selected, such as menu and list items, buttons, tabs, and check boxes Italic text Text emphasis • File and directory names • System output Monospace text • Code • Commands, their arguments, and argument values •...

  • Page 17: Hp Technical Support

    HP customer self repair (CSR) programs allow you to repair your StorageWorks product. If a CSR part needs replacing, HP ships the part directly to you so that you can install it at your convenience. Some parts do not qualify for CSR. Your HP-authorized service provider will determine whether a repair can be accomplished by CSR.

  • Page 18: Hp Websites

    HP websites For additional information, see the following HP websites: • http://www.hp.com • http://www.hp.com/go/storage • http://www.hp.com/service_locator • http://www.hp.com/support/manuals • http://www.hp.com/support/downloads Documentation feedback HP welcomes your feedback. To make comments and suggestions about product documentation, please send a message to storagedocsFeedback@hp.com. All submissions become the property of HP.

  • Page 19: Installing And Configuring The Server

    Planning for installation Before you install your HP StorageWorks All-in-One Storage System, you need to make a few decisions. Determining a network access method Before beginning setup and startup procedures, decide upon an access method to connect to the storage system.

  • Page 20: Planning A Network Configuration

    30. Configuration checklist Use the following checklist to make sure you have completed all configuration tasks for your HP All-in-One Storage System. The steps for each task are explained in more detail in subsequent chapters of this guide.

  • Page 21: Installing The Server

    “Configuring storage server for Web access access, if necessary. (optional)” on page 181. Installing the server To install your HP StorageWorks All-in-One Storage System, follow the instructions in the sections below: • Locating and writing down the serial number • Checking kit contents •...

  • Page 22: Powering On The Server

    Console” on page 23 to set up server access. Factory image The HP All-in-One Storage System is preconfigured with default storage settings and preinstalled with the Windows Storage Server 2003 R2 operating system (OS). This section provides additional details about the preconfigured storage.

  • Page 23: Default Boot Sequence

    This method requires the client to have Windows Remote Desktop capability. Remote management To establish a browser-based connection from a remote client using the HP Lights-Out 100 (LO100) or HP Integrated Lights-Out 2 (iLO 2) interface. For more information, see “Planning for installation”...

  • Page 24: Using The Remote Browser Method

    To connect the storage system to a network using the direct attach method Log on to the HP All-in-One Storage System with the default user name administrator and the password hpinvent. The HP All-in-One Storage System Management Console and Rapid Startup Wizard start automatically.

  • Page 25: Internet Options Screen

    On the remote client machine, open the Internet Explorer web browser and select Tools > Internet Options > Security. Figure 1 Internet options screen On the Security screen, select Internet or Local intranet web content zone, then click Custom Level. Scroll down to locate the ActiveX Controls and plug-ins settings.

  • Page 26: Using The Remote Desktop Method

    Log on to the HP All-in-One Storage System with the default user name administrator and the password hpinvent. NOTE: You can change the administrator name and password when you configure the server using “Running the Rapid Startup Wizard” on page 32.

  • Page 27: Logging Off And Disconnecting

    Logging off and disconnecting Remote Desktop provides two options when closing a client: you can either disconnect or log off the system. Disconnecting leaves the session running on the server. You can reconnect to the server and resume the session. If you are performing a task on the server, you can start the task and disconnect from the session.

  • Page 28: Using Remote Management Methods

    Using the Lights-Out 100 method HP Lights-Out 100 allows you to remotely manage HP All-in-One Storage Systems remotely over an Ethernet connection. It provides embedded KVM over IP for full remote graphical console capabilities. This complements the virtual media and power control for complete entry level Lights-Out remote management.

  • Page 29: Using The Integrated Lights-Out 2 Method

    DNS and DHCP, you can use it immediately without changing any settings. For more information on using HP iLO 2, see the HP Integrated Lights-Out 2 User Guide. To quickly set up iLO 2 using the default settings for iLO 2 Standard and iLO 2 Advanced features on...

  • Page 30: Configuring The Server On The Network

    Using the methods described in the HP Integrated Lights–Out 2 User Guide, connect to the iLO 2 port. NOTE: To find the default iLO 2 log on settings, see the iLO 2 Default Network Settings card attached to your server. The default DNS, administrator name, and password needed to log on will be on this card.
  • Page 31 Configuration Steps Change system administrator's user name, which is set by default to User name administrator. Change system administrator's password, which is set by default to User password hpinvent. Alert E-mail Notification E-mail address for critical, warning, or informational messages about E-mail address alert sent to server status.

  • Page 32: Running The Rapid Startup Wizard

    Microsoft web site. • Using Ethernet NIC teaming (optional)—Select models are equipped with an HP or Broadcom NIC Teaming utility. The utility allows administrators to configure and monitor Ethernet network...

  • Page 33: Installing The All-In-One Storage Manager Agent

    Copy the file to the application server(s) you will use to perform data migration tasks. Run the copied file on each application server to install the All-in-One Storage Manager Agent. On the application server that stores data to be migrated, insert the HP StorageWorks All-in-One Storage System Recovery DVD.
  • Page 34 Installing and configuring the server...

  • Page 35: Storage System Components

    The following figures show components, controls and indicators located on the front and rear panels of the AiO400r. Figure 2 HP StorageWorks 400r All-in-One Storage System front panel Table 6 HP StorageWorks 400r All-in-One Storage System front panel components Item Description...

  • Page 36: Hp Storageworks 400R All-In-One Storage System Rear Panel

    43 3, and 4 for HDD LED status descriptions. Figure 3 HP StorageWorks 400r All-in-One Storage system rear panel Table 7 HP StorageWorks 400r All-in-One Storage System rear panel components Item Description Status / Description Power supply cable socket...

  • Page 37: Hp Storageworks 400T All-In-One Storage System

    Orange = 1000 Mbps connection Captive thumbscrew for top cover Serial port Low profile/Half length expansion slot Full height/Full length expansion Populated with HP Smart Array E200 controller slot T10/T15 Wrench Thumbscrew for PCI cage Blue = Activated UID LED button...

  • Page 38: Aio400T Front Panel (Bezel On)

    Figure 4 AiO400t front panel (bezel on) Table 8 AiO400t front panel components (bezel on) Item Description Status DVD ROM drive 2nd removable media drive bay cover Power button Green = Power on mode System power Amber = Standby mode Green = Ongoing HDD activity HDD activity USB 2.0 ports...

  • Page 39: Aio400T Front Panel (Bezel Off)

    Figure 5 AiO400t front panel (bezel off) Table 9 AiO400t front panel components (bezel off) Item Description DVD ROM drive 2nd removable media drive bay EMI shield 3 — 6 Hard disk drives 1–4 behind EMI shield Figure 6 AiO400t rear panel Table 10 AiO400t rear panel components Item Description...

  • Page 40: Hp Storageworks 600 All-In-One Storage System

    Cable lock provision notch PCI slot cover retainer PCI slot cover retainer thumbscrew PCI slot covers One slot populated with HP Smart Array E200 controller Management NIC activity and link Lights-Out remote management port Blinking green = Ongoing network activity...

  • Page 41: Hp Storageworks 600 All-In-One Storage System Front Panel

    1 2 3 4 5 6 15750 Figure 7 HP StorageWorks 600 All-in-One Storage System front panel Table 11 HP StorageWorks 600 All-in-One front panel components Item Description Status Power on/Standby button Green = Power on Amber = System shut down, but power still applied...

  • Page 42: Hp Storageworks 600 All-In-One Storage System Rear Panel

    15751 Figure 8 HP StorageWorks 600 All-in-One Storage System rear panel Table 12 HP StorageWorks 600 All-in-One Storage System rear panel components Item Description Status Green = Power supply is on and functioning Power Supply LED Off = No power or inadequate power supply...

  • Page 43: Sas And Sata Hard Drive Leds

    10/100/1000 NIC link LED Off = Not linked to network SAS and SATA hard drive LEDs The following figure shows SAS/SATA hard drive LEDs. These LEDs are located on all HP All-in-One hot plug hard drives. Figure 9 SAS/SATA hard drive LEDs Table 13 SAS and SATA hard drive LED combinations 1.
  • Page 44 1. Fault/UID LED 2. Online/activity LED Status (amber/blue) (green) drive. To minimize the risk of data loss, do not replace the drive until the expansion or migration is complete. Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. Flashing regularly (1 Hz) The drive is rebuilding, or it is part of an array that is undergoing capacity expansion or stripe...

  • Page 45: Storage Management Overview

    3 Storage management overview This chapter provides an overview of some of the components that make up the storage structure of the HP All-in-One Storage System. Storage management elements Storage is divided into four major divisions: • Physical storage elements •...

  • Page 46: Physical Storage Elements

    Physical Disks Single Server RAID Arrays Storage Elements Logical Drives Selective Storage Presentaion Visible Disks Logical Partitioning Storage Elements NTFS Volumes File \Engineering \Users \Sales File Folders System \Marketing Elements from 02/10/03 09:30 \snapshot.0 Shadow Copy Shadow Copies Elements (Snapshots) from 02/10/03 11:30 \snapshot.1 Cluster Physical Disk Resources...

  • Page 47: Arrays

    • Include the appropriate number of physical drives in the arrays to create logical storage elements of desired sizes. Arrays Figure 11. With an array controller installed in the system, the capacity of several physical drives (P1–P3) can be logically combined into one or more logical units (L1) called arrays. When this is done, the read/write heads of all the constituent physical drives are active simultaneously, dramatically reducing the overall time required for data transfer.

  • Page 48: Fault Tolerance

    To protect against data loss from hard drive failure, storage systems should be configured with fault tolerance. HP recommends adhering to RAID 5 configurations. The table below summarizes the important features of the different kinds of RAID supported by the Smart Array controllers.

  • Page 49: Partitions

    It is important to note that a LUN may extend over (span) all physical drives within a storage controller subsystem, but cannot span multiple storage controller subsystems. gl0045 Figure 13 Two arrays (A1, A2) and five logical drives (L1 through L5) spread over five physical drives NOTE: This type of configuration may not apply to all storage systems and serves only as an example.

  • Page 50: File System Elements

    is important. The same performance characteristics on numbers of reads and writes apply when using fault-tolerant configurations, as is the case with controller-based RAID. These volumes can also be assigned drive letters or be mounted as mount points off existing drive letters. The administrator should carefully consider how the volumes will be carved up and what groups or applications will be using them.

  • Page 51: Using Storage Elements

    IMPORTANT: You must install and use HP SIM to benefit from the Pre-Failure Warranty for processors, SAS and SCSI hard drives, and memory modules. For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack or the HP SIM website (http://www.hp.com/go/hpsim).

  • Page 52: All-In-One Storage Manager

    HP All-in-One Storage System. Software requirements ASM comes preinstalled on your HP All-in-One Storage System. A license key is not required for ASM. Software support Only storage for application servers running on Windows Server 2003 and on the same domain as your HP All-in-One Storage System can be hosted.

  • Page 53: Storage Management Infrastructure

    ASM also creates a LUN on your HP All-in-One Storage System to host the storage group component, database component, or the user-defined application you selected in the storage-allocation wizard.

  • Page 54: Managing Storage For Shared Folders

    RAID level. You can customize all the defaults to fit your storage needs. For shared folder storage, ASM creates a LUN on your HP All-in-One Storage System to hold the shared folder and then creates the shared folder (see Figure 15).

  • Page 55: Shared Folder Storage Infrastructure

    ASM, but can be viewed in ASM by selecting the top-level shared folder in the content pane and then clicking Properties in the Action pane. Use other applications, such as Windows Explorer or the Shared Folder MMC snap-in, to create nested shared folders on your HP All-in-One Storage System.

  • Page 56: About The User Interface

    Navigation pane The Navigation pane, located on the left side of the ASM main window, allows you to quickly navigate between HP All-in-One Storage Management applications. Content pane The content pane, located in the center of the ASM main window, displays application storage and storage component (logical disk and volume) properties, such as allocated and used space, using an expandable and collapsible view based on hierarchy.

  • Page 57: Actions Pane

    Displays the used and allocated storage space, and storage status of Exchange storage groups, SQL Server databases, user-defined storage, Application View and shared folders hosted on your HP All-in-One Storage System in the content pane. See “Application View” on page 93 for more information.

  • Page 58: Defining User Interface Options

    Application areas removed from view can no longer be managed or monitored using ASM, but the application Remove from View storage remains hosted on your HP All-in-One Storage System.See “Removing application areas from view” on page 91 for more information.*...

  • Page 59: Add An All-In-One Storage System

    Select an item in the Items list and a color in the Color drop-down menu. When your color selections are complete, click Apply to apply the color settings to the content pane. Click OK. Scaling display settings Changing the scaling settings customizes the size at which each application area or shared folder is displayed in the content pane.
  • Page 60 Storage management overview...

  • Page 61: Hosting Storage For Applications And Shared Folders

    4 Hosting storage for applications and shared folders The All-in-One Storage Manager (ASM) radically simplifies hosting application storage and shared folders on your HP All-in-One Storage System, using storage-allocation wizards. Use storage-allocation wizards to allocate and configure storage for these applications: Application...

  • Page 62: Using The Host An Exchange Storage Group Wizard

    The wizard does not migrate user-defined application data to your HP All-in-One Storage System or reconfigure the application to store data on your HP All-in-One Storage System. You must do this manually as described in “Migrating...

  • Page 63: Selecting Exchange Storage Group Components

    Selecting Exchange storage group components Use the Select Storage Group Components page to select the Exchange storage group and storage group components (mail stores, public stores, and logs) you want to host on your HP All-in-One Storage System and manage using ASM.

  • Page 64: Using The Create A Shared Folder Wizard

    NOTE: You cannot create nested shared folders on your HP All-in-One Storage System using ASM. You may use other applications, such as Windows Explorer or the Shared Folder MMC snap-in, to create nested shared folders on your HP All-in-One Storage System.

  • Page 65: Using The Host A Sql Server Database Wizard

    “Selecting SQL Server database components” on page 65). Selecting SQL Server database components Use the Select Database Components page to select the SQL Server database and database components you want to host on your HP All-in-One Storage System. All-in-One Storage System...

  • Page 66: Selecting A Database Workload Type

    If you do not want ASM to delete the original files for the selected database components from the server that hosts SQL Server after it migrates the data to your HP All-in-One Storage System, clear the Delete original files after successful migration checkbox.

  • Page 67: Using The Host A User-Defined Application Wizard

    Upon completion, you can monitor and manage storage for the application through the All-in-One Storage Manager. After storage is allocated and configured on your HP All-in-One Storage System for a remote application using the Host a User-Defined Application Wizard, do the following: •...

  • Page 68: Choose Type Of Application

    Choose type of application Select the type of application for hosting a user-defined application: • Remote Windows Application- ASM will provision storage for the application and expose the storage to the given server as an NTFS volume over the iSCSI protocol. This is the recommended option for most scenarios.

  • Page 69: Allocating Space For Components

    15 MB is the minimum value that can be allocated. You cannot set the size below the minimum value. NOTE: SQL Server and Exchange default advanced configuration settings are based on SQL Server, Exchange, and HP storage best practices, and should generally not be changed. All-in-One Storage System...

  • Page 70: Storage Allocation Page

    4. Minimum and maximum storage space that can be 1. Application components, user-defined application, allocated to each application component, user-defined or shared folder name application, or shared folder listed 2. Specify size of storage space to allocate to each application component, user-defined application, or 5.

  • Page 71: Selecting Advanced Configuration Settings

    Do one of the following: • Click Next to accept the default values that ASM has provided for the components, user-defined application, or shared folder selected. • Change the default size values: • Select a row to edit. • Highlight the storage size unit value and then enter a new value as necessary: megabytes (MB), gigabytes (GB), or terabytes (TB).

  • Page 72: Advanced Window Items

    Table 19 provides a brief description of the items you can modify: Table 19 Advanced window items Item Description Notes You are prevented from setting the size below 15 MB. After the allocated storage space is full (100 percent used), no further data can be stored to the space until you increase the size using the Allocate Space Wizard.

  • Page 73: Descriptions Of Raid Levels

    Advanced window: • For Exchange and SQL Server, the wizard suggests default settings based on HP storage best practices and specific recommendations for Exchange storage group and SQL Server database components. You should generally accept these defaults.
  • Page 74 RAID level Description that holds the data fails. However, because no logical drive capacity is used for redundant data, this method offers the best capacity. This method offers the best processing speed by reading two stripes on different hard drives at the same time and by not having a parity drive.
  • Page 75 After you set a warning threshold, ASM changes the status indicator for the application component, user-defined application, or shared folder when this threshold has been surpassed. This is a warning only; no hard limits are enforced on storage capacity as a result of setting this value. The warning is visible in these places: •...

  • Page 76: Selecting Data Protection

    Before you schedule backups: • Before you schedule alternate location backups, install a tape library or other physical device and add it to the same Data Protector Express Management Domain as your HP All-in-One Storage System. • Installing a tape library that can accommodate the media rotation type required by your environment requires tape storage management experience.

  • Page 77: Scheduling Backups

    Select the backup job for the application or shared folder whose backup schedule you want to edit. Right-click the file and select Properties. See the HP StorageWorks Data Protector Express Users Guide and Technical Reference for more information. All-in-One Storage System...

  • Page 78: Reviewing Task Summary And Scheduling Tasks

    Review the list of tasks the wizard will perform to allocate and configure storage, and to host the application storage or shared folder on your HP All-in-One Storage System. For application storage, ensure the following is true before you run the tasks: •...

  • Page 79: Monitoring Task Completion Status

    Monitoring task completion status The Task Viewer shows the status of ASM wizard tasks. ASM wizard tasks allocate and configure storage, host application storage and shared folders, and configure data protection. NOTE: Click the Expand tree icon next to a task to view its subtasks. Select a task to view its description in the Details box on the Task Viewer.

  • Page 80: Migrating User-Defined Application Data From A Remote Application

    C:\application\data to G:\application\data on the application server. Delete the application data from the old path (optional). Any data saved to the iSCSI LUN on the application server is now saved to a LUN on your HP All-in-One Storage System and not on the server.

  • Page 81: Data Protection

    5 Data protection The Data protection window allows for the following: • Select how data protection is configured, using local disk-to-disk (Local D2D) and/or Alternate Location Backup (D2Any) of an Exchange storage group, SQL Server database, user-defined application, or shared folder. •...

  • Page 82: Managing Snapshots And Backups

    Do one of the following: • Select an Exchange storage group in the content pane to schedule backups of the Exchange storage group. • Select a SQL Server database in the content pane to schedule backups of the SQL Server database.

  • Page 83: Exposing A Snapshot

    Click Unexpose. Click Yes to confirm. Reverting data to snapshots ASM allows you to revert data stored on your HP All-in-One Storage System to a snapshot. This overwrites the existing data and reverts it to a past state. NOTE: Snapshots of shared folders cannot be reverted using ASM. To revert a shared folder to a past snapshot, use the Shadow Copy Client.

  • Page 84: Scheduling And Running Backups

    Select the appropriate action. Restoring data from backups ASM allows you to restore data to your HP All-in-One Storage System from the latest backups created using Data Protector Express. You can choose to overwrite the existing data with the backup, or restore the backup to an unused space on your HP All-in-One Storage System so you can selectively overwrite existing data.

  • Page 85: Selecting The Restore Destination

    • Select Overwrite Restore to overwrite the existing data with the backup. • Select Different Location Restore to save the backup to a different location, and then enter the location (path) where you want the backup saved on your HP All-in-One Storage System. To browse for the location, click Browse.

  • Page 86: Installing Data Protector Express On Other Devices

    Use the Command Line interface (CLI) found at C:\Program Files\HP\HP All-in-One Storage Manager\hpkacli.exe. The password may be set interactively, allowing the password characters to be masked, or it may be set with a single command. Use the following command to display usage details: >...
  • Page 87 2003 will require one license per protected server. The following license is required for server platforms such as Windows Server 2003:HP Data Protector Express Network Client Agent BB121AA. You may use ASM to create and manage storage for Data Protector Express virtual libraries on the AiO.
  • Page 88 Data protection...

  • Page 89: Managing Storage

    6 Managing storage After an application is hosted or shared folder is created on your HP All-in-One Storage System using a storage-allocation wizard, you can manage its storage and data by: • Increasing or reducing the allocated storage, page 89 •...

  • Page 90: Changing The Percent Full Warning Threshold

    Change the size value: • Highlight the storage size unit value and then enter a new value as necessary: megabytes (MB), gigabytes (GB), or terabytes (TB). • Highlight the storage size number value and enter a new value, or click the arrow buttons to change the value.

  • Page 91: Removing Application Areas From View

    This action is not available for shared folders. Because ASM automatically discovers top-level shared folders on your HP All-in-One Storage System, the folder would just reappear after the next discovery process. A shared folder is automatically removed from view when it is removed from your HP All-in-One Storage System.

  • Page 92: Deleting Shared Folders

    Actions pane. The share path listed on the General tab is the path for the shared folder. Deleting shared folders ASM cannot be used to delete top-level or nested shared folders that reside on your HP All-in-One Storage System. Use Windows Explorer or the Shared Folder MMC snap-in to delete shared folders that reside on your HP All-in-One Storage System.

  • Page 93: Monitoring Storage

    ASM provides storage-management functions so you can quickly view used and allocated storage, and percent full warning thresholds settings for application and shared folder storage on your HP All-in-One Storage System. You have a choice of these views for the content pane: •...

  • Page 94: Accessing Application And Shared Folder Properties

    ASM provides properties information for Exchange, Exchange storage groups, and components for storage hosted on your HP All-in-One Storage System. The following lists the tabs available in the properties window, and in parenthesis, if it applies to Exchange, Exchange storage groups, or Exchange storage group components.

  • Page 95: Operating Status: Exchange Properties

    • General tab—(Exchange, Exchange storage groups, and components) Displays the name of the application, the total capacity reserved for the application, and its operating status: Table 21 Operating status: Exchange properties Status indicator Value Exchange is running and storage is online. No alerts. See the Alerts list for more information.

  • Page 96: Mail Store Tab: Exchange Storage Group Component Properties

    Value Communication protocol used to transfer data between the server that Protocol hosts Exchange (and the storage group component) and your HP All-in-One Storage System. Application Server Host Name Name of server that hosts Exchange and the storage group component.

  • Page 97: Public Store Tab: Exchange Storage Group Component Properties

    Value Description Streaming Database File Path to the file that stores Internet-formatted messages, such as native (Exchange 2003 only) Multipurpose Internet Extensions (MIME) content. Replication type Indicates if LCR is being used. LCR Status Indicate Exchange warnings for LCR. LCR Copy Copy of the active/original exchange component.

  • Page 98: Operating Status: Shared Folder Properties

    Path to LCR system file copies Accessing properties for shared folders ASM provides properties information for shared folders pool and for any shared folder on your HP All-in-One Storage System. Using properties information, you can determine details about shared-folder status, including allocated space, and nested shares (if any), whether shared-folder storage is online or offline, and any warning or critical status indicators.
  • Page 99 ASM provides properties information for the SQL server, databases and database components when SQL Server storage is hosted on your HP All-in-One Storage System. The following lists the tabs in the properties window, and in parenthesis, which applications are applicable: SQL Server, SQL Server databases or SQL Server database components.

  • Page 100: Operating Status: Sql Server Properties

    SQL Server. Communication protocol used to transfer data between the server that Protocol hosts SQL Server (and the database component) and your HP All-in-One Storage System. Application Server Host Name Name of server that hosts SQL Server and the database component.

  • Page 101: Data File Tab: Sql Server Database Component Properties

    81 for more information. Accessing properties for the user-defined applications ASM provides properties information for the user-defined applications on your HP All-in-One Storage System. Using properties information, you can determine the status of all user-defined application areas monitored by ASM, and any warning or critical status indicators.

  • Page 102: Operating Status: User-Defined Application Properties

    ASM to the application server. Communication protocol used to transfer data between the server that Protocol hosts the user-defined application and your HP All-in-One Storage System. Application Server Host Name Name of server that hosts the user-defined application.

  • Page 103: Data Protection

    Data Protection allows you to configure for virtual libraries and snapshots. Properties window ASM provides properties information on your HP All-in-One Storage System. The following lists the tabs available in the properties window for Data Protection. Table 35 Operating status: Data Protection properties...

  • Page 104: Storage Tab: Shared Folder Properties

    See Table 19 on page 72 for more information. Storage Server Volume - Mount Path to where the volume that holds the shared folder on your HP All-in-One Paths Storage System is mounted. • Warning Threshold- Allows you to change the percent full warning threshold value for the virtual library.

  • Page 105: Storage View

    For example, all the volumes on your HP All-in-One Storage System are displayed under the logical disks they reside on, and all the applications and shared folders hosted on your HP All-in-One Storage System are displayed under the volumes on which they are stored. Application components and individual shared folders are displayed under the application or shared folders pool to which they belong.

  • Page 106: Accessing Storage Area Properties

    Right-click the item in the content pane and select Properties. Accessing properties for HP All-in-One Storage System volumes ASM provides properties information for any volume on a logical disk on your HP All-in-One Storage System. In the Actions pane, select Storage View.

  • Page 107: Storage Tab: Hp All-In-One Storage System Logical Disk Properties

    Storage tab—Displays the unallocated space, used space, free space on the volume, and also details on your volume or logical disk properties, depending on the application open: Table 40 Storage tab: HP All-in-One Storage System logical disk properties Property Value System Name Name the system uses to identify the logical disk.

  • Page 108: Application Server View

    In the Actions pane, select Application Server View. • To view the properties for all application servers with storage hosted on your HP All-in-One Storage System, select All from the Filters drop-down menu, located at the top of the content pane. See Filters drop-down menu on page 57 for more information.

  • Page 109: Operating Status: Application Server Volume Properties

    In the Actions pane, select Application Server View. Do one of the following: • Select an application server volume in the content pane and then click Properties in the Actions pane. • Right-click an application server volume in the content pane and select Properties. Click one of the following tabs: •...

  • Page 110: Storage Utilization View

    • Unallocated—Unused storage that is not allocated. The unallocated space value is the total unused space on your HP All-in-One Storage System that has not been allocated to host application or shared folder storage. Unallocated storage includes raw (unconfigured) storage and unused configured storage (logical disks).

  • Page 111: Troubleshooting, Servicing, And Maintenance

    8 Troubleshooting, servicing, and maintenance Troubleshooting the storage system Use the references and general guidelines in this section to troubleshoot your HP StorageWorks All-in-One Storage System. Operating system problems and resolutions Use the suggestions below to help resolve operating system issues.

  • Page 112: Application Software Problems

    (no information will be lost). Or, manually enter the login as follows: Open SQL Server Enterprise Manager. Connect to the server with SQL Server data you want to store on your HP All-in-One Storage System. Select the Security Folder.

  • Page 113: Example Of Alert

    Figure 18 Example of alert To view alerts: Select an item in the Content pane and click Properties in the Actions pane to view the alerts for • the item selected. Storage status is displayed as an icon when the storage status is Warning or Critical: •...
  • Page 114 HP Exchange. ASM user interface to stop '<server>' . All-in-One Storage receiving alerts. System.
  • Page 115 Object Alert text Description Possible cause Solution Administrator has Exchange This MailStore Status of mail store is placed mail store Return mail store to online. MailStore is offline. offline. offline. This Administrator has Exchange Status of public store Return public store to PublicStore is placed public store PublicStore...
  • Page 116 Object Alert text Description Possible cause Solution Health: Failing Replace failing hard drive A hard drive is failing but still Hard drive is failing. now (optional) or replace but still working. working hard drive after it fails. Logical disk is configured as RAID 1 Health: Failing or RAID 1+0(10).

  • Page 117: Recovering From Logical Disk Failure

    Application component or shared folder data stored on a logical disk that failed is lost. To recover the data and reallocate storage on your HP All-in-One Storage System, replace any failed hard drives, allocate new storage on your HP All-in-One Storage System using a storage-allocation wizard to replace the lost storage, and then restore the data to the new allocated storage using a backup (see “Restoring data from...

  • Page 118: Storage System Documentation

    SEA (System Event Analyzer) If you have a warranty or service contract with HP you are entitled to these tools free of charge. You must, however, upgrade the tools at least once a year, because the software expires after one year.

  • Page 119: Certificate Of Authenticity

    To install WEBES on your storage system, run the setup executable located in the C:\hpnas\Components\WEBES folder. Certificate of Authenticity The Certificate of Authenticity (COA) label is used to: • Upgrade the factory-installed operating system using the Microsoft Upgrade program for license validation.
  • Page 120 Troubleshooting, servicing, and maintenance...

  • Page 121: System Recovery

    System. The System Recovery DVD The HP StorageWorks All-in-One Storage System Recovery DVD that is provided with your storage system allows you to install an image or recover from a catastrophic failure. You may boot from the DVD and restore the system to the factory condition at any time. This allows you to recover the system if all other means to boot the system fails.
  • Page 122 System recovery...

  • Page 123: A File Server Management

    A File server management This chapter begins by identifying new or improved file services in Windows Storage Server 2003 R2. The remainder of the chapter describes the many tasks and utilities that play a role in file server management. New or improved file services features in Windows Storage Server 2003 R2 Storage Manager for SANs The Storage Manager for SANs (also called Simple SAN) snap-in enables you to create and manage...

  • Page 124: Search Enhancements

    Server 2003 R2. HP All-in-One Management Console The HP All-in-One Management Console is a user interface in Windows Storage Server 2003 R2 that provides one place to manage files or print serving components. The console is accessible using Remote Desktop or a web browser.

  • Page 125: File Services Management

    Configuring additional storage involves creating arrays, logical disks, and volumes. Table 46 shows the general task areas to be performed as well as the utilities needed to configure storage for an HP Smart Array-based storage system. Table 46 Tasks and utilities needed for storage system configuration...

  • Page 126: Storage Management Utilities

    Select Start > Programs > HP Management Tools > Array Configuration Utility. If the Execution Mode for ACU is set to Remote Mode, log in to the HP System Management Homepage. The default user name is administrator and the default password is hpinvent.

  • Page 127: Disk Management Utility

    • Do not alter the disk labeled “DON'T ERASE.” • HP does not recommend spanning array controllers with dynamic volumes. The use of software RAID-based dynamic volumes is not recommended. Use the array controller instead; it is more efficient. •...

  • Page 128: Scheduling Defragmentation

    • Basic disks can contain up to four primary partitions (or three primary partitions and one extended partition). • Format drives with a 16 K allocation size for best support of shadow copies, performance, and defragmentation. • NTFS formatted drives are recommended, because they provide the greatest level of support for shadow copies, encryption, and compression.

  • Page 129: Adding Storage

    When enabling disk quotas, it is possible to set both the disk quota limit and the disk quota warning level. The disk quota limit specifies the amount of disk space a user is allowed to use. The warning level specifies the point at which a user is nearing his or her quota limit. For example, a user's disk quota limit can be set to 50 megabytes (MB), and the disk quota warning level to 45 MB.

  • Page 130: Extending Storage Using Windows Storage Utilities

    The Array Configuration Utility enables online capacity expansion of the array and logical drive for specific MSA storage arrays, such as the MSA1000 and MSA1500. For more information, use the ACU online help, or the procedures to “Expand Array” in the HP Array Configuration Utility User Guide...

  • Page 131: Volume Shadow Copies

    Volume shadow copies The Volume Shadow Copy Service provides an infrastructure for creating point-in-time snapshots (shadow copies) of volumes. Shadow Copy supports 64 shadow copies per volume. A shadow copy contains previous versions of the files or folders contained on a volume at a specific point in time.

  • Page 132: Allocating Disk Space

    Shadow copies are designed for volumes that store user data such as home directories and My Documents folders that are redirected by using Group Policy or other shared folders in which users store data. Shadow copies work with compressed or encrypted files and retain whatever permissions were set on the files when the shadow copies were taken.

  • Page 133: Identifying The Storage Area

    Identifying the storage area To store the shadow copies of another volume on the same file server, a volume can be dedicated on separate disks. For example, if user files are stored on H:\, another volume such as S:\ can be used to store the shadow copies.

  • Page 134: Mounted Drives

    Mounted drives A mounted drive is a local volume attached to an empty folder (called a mount point) on an NTFS volume. When enabling shadow copies on a volume that contains mounted drives, the mounted drives are not included when shadow copies are taken. In addition, if a mounted drive is shared and shadow copies are enabled on it, users cannot access the shadow copies if they traverse from the host volume (where the mount point is stored) to the mounted drive.

  • Page 135: Shadow Copies Stored On A Source Volume

    cache file cache file cache file Figure 20 Shadow copies stored on a source volume The cache file location can be altered to reside on a dedicated volume separate from the volumes containing files shares. (See Figure 21). cache file cache file cache file Figure 21 Shadow copies stored on a separate volume...

  • Page 136: Enabling And Creating Shadow Copies

    CAUTION: If the data on the separate volume L: is lost, the shadow copies cannot be recovered. Enabling and creating shadow copies Enabling shadow copies on a volume automatically results in several actions: • Creates a shadow copy of the selected volume. •...

  • Page 137: Viewing Shadow Copy Properties

    NOTE: When deleting a shadow copy schedule, that action has no effect on existing shadow copies. Viewing shadow copy properties The Shadow Copy Properties page lists the number of copies, the date and time the most recent shadow copy was made, and the maximum size setting. NOTE: For volumes where shadow copies do not exist currently, it is possible to change the location of the cache file.

  • Page 138: Disabling Shadow Copies

    On the Shadow Copies tab, ensure that the volume is selected, and then click Enable. Shadow copies are now scheduled to be made on the alternate volume. Disabling shadow copies When shadow copies are disabled on a volume, all existing shadow copies on the volume are deleted as well as the schedule for making new shadow copies.

  • Page 139: Shadow Copies For Shared Folders

    Click the Shadow Copies tab. See Figure Figure 22 Accessing shadow copies from My Computer Shadow Copies for Shared Folders Shadow copies are accessed over the network by supported clients and protocols. There are two sets of supported protocols, SMB and NFS. All other protocols are not supported; this would include HTTP, FTP, AppleTalk, and NetWare Shares.

  • Page 140: Smb Shadow Copies

    SMB shadow copies Windows users can independently access previous versions of files stored on SMB shares by using the Shadow Copies for Shared Folders client. After the Shadow Copies for Shared Folders client is installed on the user's computer, the user can access shadow copies for a share by right-clicking on the share to open its Properties window, clicking the Previous Versions tab, and then selecting the desired shadow copy.

  • Page 141: Nfs Shadow Copies

    NFS shadow copies UNIX users can independently access previous versions of files stored on NFS shares via the NFS client; no additional software is required. Server for NFS exposes each of a share's available shadow copies as a pseudo-subdirectory of the share. Each of these pseudo-subdirectories is displayed in exactly the same way as a regular subdirectory is displayed.

  • Page 142: Recovering An Overwritten Or Corrupted File

    Click Restore to restore the file or folder to its original location. Click Copy... to allow the placement of the file or folder to a new location. Figure 24 Recovering a deleted file or folder Recovering an overwritten or corrupted file Recovering an overwritten or corrupted file is easier than recovering a deleted file because the file itself can be right-clicked instead of the folder.

  • Page 143: Backup And Shadow Copies

    Click either Copy... or Restore. Clicking Restore enables the user to recover everything in that folder as well as all subfolders. Clicking Restore does not delete any files. Backup and shadow copies Shadow copies are only available on the network via the client application, and only at a file or folder level as opposed to the entire volume.

  • Page 144: Folder And Share Management

    The data is now ready to use. Folder and share management The HP All-in-One Storage System supports several file-sharing protocols, including DFS, NFS, FTP, HTTP, and Microsoft SMB. This section discusses overview information as well as procedures for the setup and management of the file shares for the supported protocols. Security at the file level and at the share level is also discussed.

  • Page 145: Properties Dialog Box, Security Tab

    Click Properties, and then click the Security tab. Figure 25 Properties dialog box, Security tab Several options are available on the Security tab: • To add users and groups to the permissions list, click Add. Follow the dialog box instructions. •...

  • Page 146: Advanced Security Settings Dialog Box, Permissions Tab

    To modify ownership of files, or to modify individual file access level permissions, click Advanced. illustrates the properties available on the Advanced Security Settings dialog box. Figure 26 Figure 26 Advanced Security settings dialog box, Permissions tab Other functionality available in the Advanced Security Settings dialog box is illustrated in Figure 26 and includes: •...

  • Page 147: User Or Group Permission Entry Dialog Box

    Enable or disable permissions by selecting the Allow box to enable permission or the Deny box to disable permission. If neither box is selected, permission is automatically disabled. Figure 27 illustrates the Edit screen and some of the permissions. Figure 27 User or group Permission Entry dialog box Another area of the Advanced Security Settings is the Auditing tab.

  • Page 148: Advanced Security Settings Dialog Box, Auditing Tab

    Figure 28 Advanced Security Settings dialog box, Auditing tab Click Add to display the Select User or Group dialog box. Figure 29 Select User or Group dialog box NOTE: Click Advanced to search for users or groups. Select the user or group. File server management...

  • Page 149: Auditing Entry Dialog Box For Folder Name Ntfs Test

    Click OK. The Auditing Entry dialog box is displayed. Figure 30 Auditing Entry dialog box for folder name NTFS Test Select the desired Successful and Failed audits for the user or group. Click OK. NOTE: Auditing must be enabled to configure this information. Use the local Computer Policy Editor to configure the audit policy on the storage system.

  • Page 150: Share Management

    There are several ways to set up and manage shares. Methods include using Windows Explorer, a command line interface, or the HP All-in-One Management Console. As previously mentioned, the file-sharing security model of the storage system is based on the NTFS file-level security model.

  • Page 151: Defining Access Control Lists

    By keeping the number of shares and other resources low, the performance of the storage system is optimized. For example, instead of sharing out each individual user's home directory as its own share, share out the top-level directory and let the users map personal drives to their own subdirectory. Defining Access Control Lists The Access Control List (ACL) contains the information that dictates which users and groups have access to a share, as well as the type of access that is permitted.

  • Page 152: Managing Shares

    Managing shares Shares can be managed using the HP All-in-One Management Console. Tasks include: • Creating a new share • Deleting a share • Modifying share properties • Publishing in DFS CAUTION: Before deleting a share, warn all users to exit that share and confirm that no one is using that share.

  • Page 153: Storage Reports

    Additional information and references for file services Backup HP recommends that you back up the print server configuration whenever a new printer is added to the network and the print server configuration is modified. For details on implementing the backup solution, see the Medium Business Guide for Backup and Recovery.

  • Page 154: Security

    downloaded from Microsoft at http://www.microsoft.com/technet/itsolutions/smbiz/mits/av/ mit_av.mspx. Security For guidance on hardening file servers, see the Microsoft Windows Server 2003 Security Guide. The guide can be viewed or downloaded at http://www.microsoft.com/technet/security/prodtech/ windowsserver2003/w2003hg/sgch00.mspx. More information The following web sites provide detailed information for using print services with Windows Server 2003, which also applies to Windows Storage Server 2003.

  • Page 155: B Print Services

    The inclusion of the HP Download Manager (DLM) for Jetdirect Printer Devices on the factory image is new. DLM is used to upgrade HP Jetdirect print server firmware on HP network printers. The utility obtains the latest firmware catalog from either from the Internet or from a computer with the download firmware images already in place.

  • Page 156: Network Printer Drivers

    Select Off (not recommended) and click OK. HP Web Jetadmin installation HP Web Jetadmin is used to manage a fleet of HP and non-HP network printers and other peripherals using a web browser. Although not preinstalled, the Web Jetadmin software is located in the C:\hpnas\Components\WebJetadmin folder, and can be installed by running the WJA.exe...

  • Page 157: Planning Considerations For Print Services

    Printer Properties” in the Windows online help for additional information. Print queue creation In addition to Windows Printer and Faxes, Add Printer Wizard, the HP Install Network Printer Wizard (INPW) utility discovers HP Jetdirect network printers on the local network and allows print queues to...

  • Page 158: Sustaining Print Administration Tasks

    Driver updates Print drivers The latest print drivers for many HP network printers are supplied on the Service Release DVD. If selected as part of the service release installation process, updated print drivers are copied to the print drivers folder C:\hpnas\PRINTERS on the storage system. Print drivers are also available for download on the HP Support web site for individual network printers.

  • Page 159: Printer Server Scalability And Sizing

    Internet is required, or the utility can be pointed to a local location where the firmware images are stored. For more information on upgrading HP Jetdirect print server firmware, see http:// h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpj06917. Printer server scalability and sizing A Microsoft technical paper overviews several key factors that influence the capacity of a given print server configuration.

  • Page 160: Troubleshooting

    Specific print server related problems as well as other system related known issues and workarounds are addressed in release notes. To view the latest version, see http://www.hp.com/go/support. Select See support and troubleshooting information and enter a product name/number. Under self-help resources, select the manuals (guides, supplements, addendums, etc) link.

  • Page 161: C Microsoft Services For Network File System (Msnfs)

    UNIX special device support—Microsoft Services for NFS supports UNIX special devices (mknod). • Enhanced UNIX support—Microsoft Services for NFS now supports the following versions of UNIX: • Hewlett Packard HP-UX version 11i • IBM AIX version 5L 5.2 • Red Hat Linux version 9 •...

  • Page 162: Msnfs Use Scenarios

    • Administration components • Password synchronization • Server for NIS The UNIX Identity Management component is not enabled by default on the storage system. To install this component: Access Add/Remove Programs. Select Add/Remove Windows Components > Active Directory Services > Details. Install Identity Management for Windows.

  • Page 163: Administering Msnfs

    To access Microsoft Services for Network File System from the HP All-in-One Management Console: Access the HP All-in-One Management Console by clicking on the shortcut icon on the desktop. In the left pane of the console, select the Share Folder Management listing.

  • Page 164: Authentication Table

    Refer to Table 47 for guidance as to when to use NFS Authentication DLL instead of S4U legacy NFS and R2 MSNFS. Table 47 Authentication table Domain controller type Legacy NFS (pre-WSS2003 MSNFS (WSS2003 R2) Legacy domain controller Requires NFS Authentication DLL Requires NFS Authentication DLL on (pre-WSS2003) on domain controller...
  • Page 165 Read the End User License Agreement carefully. If you accept the terms of the agreement, click I accept the terms in the License Agreement, and then click Next to continue installation. If you click I do not accept the License Agreement (Exit Setup), the installation procedure terminates. Click Custom Installation, and then click Next.
  • Page 166 Accessing NFS resources for Windows users and groups Server for NFS allows Windows clients to access NFS resources on the storage system without separately logging on to Server for NFS. The first time users attempt to access an NFS resource, the Server for NFS looks up the user’s UNIX UID and GID information in either Windows Active Directory or the User Name Mapping function on the storage system.
  • Page 167 is not mapped to a Windows account is treated by Server for NFS as an anonymous user. By default, the user identifier (UID) and group identifier (GID) is -2. For example, if files are created on an NFS Share by UNIX users who are not mapped to Windows users, the owner of those files are listed as anonymous user and anonymous group, (-2,-2).

  • Page 168: User Name Mapping

    • Use naming conventions to identify shares with EUC encoding • Protect configuration files For further details, see the online help for Microsoft Services for Network File System. User Name Mapping The User Name Mapping component provides centralized user mapping services for Server for NFS and Client for NFS.

  • Page 169: Microsoft Services For Nfs Troubleshooting

    User Name Mapping Administration The User Name Mapping administration online help contains information for the following topics: • Understanding the User Name Mapping component • Starting and stopping User Name Mapping • Configuring User Name Mapping • Securing access to the User Name Mapping server •...

  • Page 170: Optimizing Server For Nfs Performance

    Command Function showmount –e Views exports from the server and their export permissions unmount Removes NFS-mounted drives For further details, see the online help for Microsoft Services for Network File System. Optimizing Server for NFS performance The following sources provide useful information on how to optimize performance for Microsoft Services for NFS.
  • Page 171 Point and print from UNIX to Windows Server 2003 Point-and-Print behavior from UNIX clients to Windows Server 2003 and Windows Storage Server 2003 is similar to the behavior for Windows 95, Windows 98, and Windows Millennium Edition clients, because all these clients create SMB connections. However, the non–Windows operating systems maintain their own driver model, so these clients do not automatically get the driver during Point and Print—they must install the driver locally.
  • Page 172 Microsoft Services for Network File System (MSNFS)

  • Page 173: D Other Network File And Print Services

    D Other network file and print services This chapter discusses file and print services for NetWare and Macintosh. File and Print Services for NetWare (FPNW) File and Print Services for NetWare (FPNW) is one part of the Microsoft software package called Services for NetWare.

  • Page 174: Managing File And Print Services For Netware

    Select the NETSFNTSRV file, and then click OK. File and Print Services for NetWare should now be displayed as an option to install. Select File and Print Services for NetWare, and then click OK. Managing File and Print Services for NetWare FPNW resources are managed through Server Manager.

  • Page 175: Creating And Managing Netware Users

    Select FPNW, and then click Properties. Figure 32 File and Print Services for NetWare dialog box Enter an FPNW Server Name and Description. This server name must be different from the server name used by Windows or LAN Manager-based clients. If changing an existing name, the new name is not effective until stopping and restarting FPNW.

  • Page 176: Adding Local Netware Users

    Adding local NetWare users From the storage system desktop, click the Management Console icon, click Core Operating System, and then click Local Users and Groups. Right-click the Users folder, and then click New User. Figure 33 New User dialog box Enter the user information, including the user's User name, Full name, Description, and Password.

  • Page 177: Managing Ncp Volumes (Shares)

    Click the NetWare Services tab. Figure 34 NetWare Services tab Select Maintain NetWare compatible login. Set other NetWare options for the user, and then click OK. NOTE: The installation of File and Print Services for NetWare also creates a supervisor account, which is used to manage FPNW.

  • Page 178: Creating A New Ncp Share

    Creating a new NCP share To create a new file share: From the storage system desktop, select Start > Settings > Control Panel > Administrative Tools > Server Manager. Select File and Print Service for NetWare> Shared Volumes. Click Create Volume. Specify the volume name and path.

  • Page 179: Additional Resources

    Point and Print—they must install the driver locally. Like the Windows 95, Windows 98, and Windows Millennium clients, these non–Windows clients do not receive driver updates from the print server after a driver is initially downloaded. The same connection methods are available: drag and drop, the Add Printer Wizard, referencing a UNC path, or double-clicking the shared printer icon.

  • Page 180: Print Services For Macintosh

    AppleTalk shares can be set up only after AppleTalk Protocol and File Services for Macintosh have been installed on the storage system. CAUTION: AppleTalk shares should not be created on clustered resources because data loss can occur due to local memory use. •...

  • Page 181: E Configuring Storage System For Web Access (Optional)

    E Configuring storage system for Web access (optional) Setting up an Internet connection Before running Windows 2003 R2 operating system updates, you must set up an Internet connection for the storage system. There are two methods for configuring an Internet connection: •...

  • Page 182: Proxy Server Settings

    Figure 36 Proxy server settings In the Address box, type the network name or IP address of the proxy server. In the Port box, type the port number that is used by the proxy server for client connections (for example, 8080). Click the Bypass proxy server for local addresses check box if you do not want the proxy server computer to be used when you connect to a computer on the local network.

  • Page 183: F Regulatory Compliance And Safety

    F Regulatory compliance and safety Federal Communications Commission notice Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many electronic devices, including computers, generate RF energy incidental to their intended function and are, therefore, covered by these rules.

  • Page 184: Declaration Of Conformity For Products Marked With The Fcc Logo, United States Only

    Declaration of conformity for products marked with the FCC logo, United States only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 185: International Notices And Statements

    • Allow only HP authorized service technicians to repair the unit. The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured from August 1, 1976.

  • Page 186: Bsmi Notice

    BSMI notice Japanese notice Korean notice A&B Class A equipment Class B equipment Regulatory compliance and safety...

  • Page 187: Safety

    1.00 mm 2 or 18 AWG, and the length of the cord must be between 1.8 m (6 ft) and 3.6 m (12 ft). If you have questions about the type of power cord to use, contact an HP authorized service provider.

  • Page 188: Japanese Power Cord Notice

    Japanese power cord notice Electrostatic discharge To prevent damage to the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices.

  • Page 189: Danish Notice

    Tento symbol na produktu nebo balení ozna uje výrobek, který nesmí být vyhozen spolu s ostatním domácím odpadem. Povinností uživatele je p edat takto ozna ený odpad na p edem ur ené sb rné místo pro recyklaci elektrických a elektronických za ízení. Okamžité t íd ní a recyklace odpadu pom že uchovat p írodní...

  • Page 190: Estonian Notice

    Estonian notice Seadmete jäätmete kõrvaldamine eramajapidamistes Euroopa Liidus See tootel või selle pakendil olev sümbol näitab, et kõnealust toodet ei tohi koos teiste majapidamisjäätmetega kõrvaldada. Teie kohus on oma seadmete jäätmed kõrvaldada, viies need elektri- ja elektroonikaseadmete jäätmete ringlussevõtmiseks selleks ettenähtud kogumispunkti. Seadmete jäätmete eraldi kogumine ja ringlussevõtmine kõrvaldamise ajal aitab kaitsta loodusvarasid ning tagada, et ringlussevõtmine toimub viisil, mis kaitseb inimeste tervist ning keskkonda.

  • Page 191: Greek Notice

    garantiert eine Wiederverwertung, die die Gesundheit des Menschen und die Umwelt schützt. Informationen dazu, wo Sie Rücknahmestellen für Ihre Altgeräte finden, erhalten Sie bei Ihrer Stadtverwaltung, den örtlichen Müllentsorgungsbetrieben oder im Geschäft, in dem Sie das Gerät erworben haben. Greek notice Hungarian notice Készülékek magánháztartásban történ selejtezése az Európai Unió...

  • Page 192: Lithuanian Notice

    Para obter mais informações sobre locais que reciclam esse tipo de material, entre em contato com o escritório da HP em sua cidade, com o serviço de coleta de lixo ou com a loja em que o produto foi adquirido.

  • Page 193: Slovakian Notice

    Slovakian notice Likvidácia vyradených zariadení v domácnostiach v Európskej únii Symbol na výrobku alebo jeho balení ozna uje, že daný výrobok sa nesmie likvidova s domovým odpadom. Povinnos ou spotrebite a je odovzda vyradené zariadenie v zbernom mieste, ktoré je ur ené...
  • Page 194 och gör att avfallet återvinns på ett sätt som skyddar människors hälsa och miljön. Kontakta ditt lokala kommunkontor, din närmsta återvinningsstation för hushållsavfall eller affären där du köpte produkten för att få mer information om var du kan lämna ditt avfall för återvinning. Regulatory compliance and safety...

  • Page 195: Glossary

    The process of moving data from one storage device to another, such as moving application data from an application server to your HP All-in-One Storage System. ASM supports automatic data migration for Exchange and SQL Server data. All-in-One Storage System...
  • Page 196 ASM works with the Microsoft iSCSI Target, which builds the iSCSI infrastructure on application servers with data hosted on your HP All-in-One Storage System and on your HP All-in-One Storage System so that application data is stored on your HP All-in-One Storage System.
  • Page 197 Microsoft Management Console snap-in. An application added to the Microsoft Management Console. All-in-One Storage Manager is a MMC snap-in. Network-attached storage. This term is used to refer to a specialized type of file server. The HP All-in-One Storage System provides NAS storage as well as iSCSI storage. Navigation pane...
  • Page 198 Status bar The area located at the bottom of the ASM user interface that displays server information and system alerts. tape library An enclosure filled with magnetic tape cartridges, tape drives, and a robot(s). The tapes are electronically labeled for identification and stored in library slots when not in use.

  • Page 199: Index

    49 for application server volumes, 108 basic disks, 49, 50 Exchange, 94 battery replacement notice, 187 for HP All-in-One Storage System logical boot sequence, 23 disks, 106 for HP All-in-One Storage System volumes, for shared folders pools, 98 cables, 184...
  • Page 200 50 technical support, 17 spanning multiple LUNs, 49 Jetadmin, 156 HP All-in-One Storage System alerts operating status values, 106 HP All-in-One Storage System logical disks electrostatic discharge, 188 accessing properties, 106 European Union notice, 185 Storage properties, 107 expanding storage...
  • Page 201 Remote Desktop method application server volumes, 109 connecting to network, 26 Exchange, 95 Remote management, 28 HP All-in-One Storage System alerts, 106 shared folders, 98 user-defined applications, 102 safety, 187 operating system problems, 111 SAS/SATA hard drives...
  • Page 202 101 shadow copies storage reports, 153 mounted drives, 134 Storage View, 93, 105 shadow copies, 50 Subscriber's Choice, HP, 17 backups, 143 Subscriber's Choice, 118 cache file, 134 symbols in text, 16 defragmentation, 133 system updates, 117 described, 131...
  • Page 203 16 Warning Threshold, 96 WEBES (Web Based Enterprise Services, 118 websites customer self repair, 17 , 18 HP Subscriber's Choice for Business, 17 product manuals, 15 WEEE directive, 188 All-in-One Storage System...
  • Page 204 Index...

This manual is also suitable for:

Storageworks 400rStorageworks 400tStorageworks 600

Table of Contents