Powering the library on and off
This section explains:
Powering on the library
To power on the library:
1. Open the back door of the library cabinet and flip the breaker switches to the
2. Verify that power cables are firmly in place.
3. Close all library doors.
4. Power on the power switch located behind the laptop tray (see
Note:
for the first few minutes of this process.
Placing the library on-line or off-line
To place the library on- or off-line:
1. With the library powered on, press the
2. Select
For more information on the
page 77.
ESL E-Series Tape Library User's Guide
Powering on the
library, page 63
Placing the library on-line or
Powering off the
library, page 64
on position (right).
The breaker switches are on the power distribution unit located on the bottom
right side of the library cabinet.
page 61).
The library requires several minutes to power on. Nothing displays on the OCP
Operations
screen.
Cabinet
and use the up and down arrows to take the library off-line.
off-line, page 63
Ops
button on the OCP to access the
Operations
screen, see
Library Operations
Figure
"Operations
screen" on
22,
63