HP StorageWorks ESL E-Series User Manual page 152

Sense Data Values
Table 24: Sense data values (Hexadecimal) (Continued)
Sense
Key ASC ASCQ
6 80
6 80
6 80
6 80
6 2A
B 08
B 08
B 30
152
07
SYSTEM STOP BUTTON WAS PRESSED
The STOP button on the control panel was pressed. Press the STOP
button again to start the cabinet. Retry command.
08
LOGICAL UNIT TURNED ON-LINE
Through the menu options, bring the library on-line. This message is
informational only; no action is required.
09
LOGICAL UNIT TAKEN OFFLINE
Library was taken off-line through the remote web management or OCP.
0E
DATA TRANSFER CHANGED
A drive has been inserted/removed into the system. Use "Read Element
Status" to determine status of drives.
01
MODE PARAMETERS CHANGED
Mode parameters may have changed due to another host issuing a
Mode Select command.
00
LOGICAL UNIT COMMUNICATION FAILURE
Check cables. Ensure library unit is powered on. Retry command.
01
LIBRARY COMMUNICATION TIME-OUT
Internal communications not responding. Retry command. Check the
following internal cable connections: Ethernet cable, umbilical cable,
robotics controller, cabinet controller.
00
INCOMPATIBLE MEDIA
An attempt was made to move media to a destination element that is
incapable of receiving it. Make sure you are using the correct media
and that it is labeled with the correct barcode.
Message Name/Description
ESL E-Series Tape Library User's Guide