HP StorageWorks ESL E-Series User Manual page 22

Library Overview
The OCP consists of the following features (see
Table 2: OCP features
Note:
Tools (L&TT), available from http://www.hp.com/support/tapetools. Additionally, you can
configure the library and monitor library status using HP StorageWorks Command
View TL that shipped with your product. For support information, visit
http://www.hp.com/support/cvtl.
22
Feature
OCP The OCP displays library status information and allows you to
access the library menus. These menus allow you to view or
change the library settings, run demonstration programs, or
run diagnostic tests.
The OCP is discussed in
OCP buttons Use these buttons in combination with the OCP to scroll through
screens and select options or commands. The functionality of
these buttons changes depending on the currently displayed
GUI screen.
LED indicator The green LED lights when the library is fully operational and
ready to accept host commands. It flashes while the library is
transitioning from a READY state to a NOT READY state. The
library will not be READY during power-on self-tests, when
magazines are being released, or during access to certain
menu items.
You can also perform diagnostics using HP StorageWorks Library and Tape
Table 2):
Description
"Using the OCP" on page
ESL E-Series Tape Library User's Guide
65.