Disconnecting Library Cables - HP StorageWorks ESL E-Series User Manual

11. Close the library doors and add shipping foam to the bottom of the library
Figure 46: Adding the shipping foam to the library perimeter

Disconnecting library cables

To disconnect library cables:
1. Disconnect the FC cables connecting from the library to the host.
2. Disconnect the Ethernet cable connecting to the local network.
3. Disconnect the power cord from the library to its power source.
4. Pack the cables removed in
5. Disconnect the following cables but leave them routed in the channel:
ESL E-Series Tape Library User's Guide
perimeter (see Figure
accessories.
Drive cluster and card cage power cables
Drive cluster Ethernet cables
Drive cluster I2C cables
46).
Foam
step 1 through
Relocating the Library
step 3 with other library
123