Using The Ocp; Home Screen - HP StorageWorks ESL E-Series User Manual

Using the OCP

The OCP is located on the front of the library. The menus on the OCP allow you to
obtain information about the library, execute library commands, and test library
functions.
The status bar at the top of the OCP displays library status at all times, at the left
of the bar. The status can be Online, Going Online, or Offline, followed by a
warning level: OK, Warning, or Critical. In addition, when a library firmware
upgrade is in progress, Upgrading FW is displayed on the right side of the status
bar.
Before using the OCP to perform library functions, familiarize yourself with the:

Home screen

The first screen the OCP displays after library initialization is the home screen.
This screen displays library status and provides information on the IP address,
number of bins, tape drives, ports, and date (see
Figure 24: Home screen
ESL E-Series Tape Library User's Guide
Home screen, page 65
OCP buttons, page 66
Library Operations
Figure 24).
65