Powering Off The Library - HP StorageWorks ESL E-Series User Manual

Library Operations

Powering off the library

To power off the library:
1. Place the library off-line, see
2. Verify that the OCP display indicates "Off-line" from the
3. Verify that the media picker is empty.
4. Verify that no backups are in process.
5. Turn off the power switch located on the front of the library (see
6. Wait for the library to complete the shutdown process. (This usually takes 30
7. Open the back door of the library cabinet and flip the breaker switches to the
Note:
power distribution unit are in the off (left) position.
64
page 63.
The library robotics completes any current commands and then stops.
page 61).
seconds, but may take up to two minutes.)
off position (left). The breaker switches are on the power distribution unit
located on the bottom left side of the library cabinet.
When powering off the library, ensure that the two breaker switches on the
"Placing the library on-line or
ESL E-Series Tape Library User's Guide
off-line" on
Operations
screen.
Figure 22 on