HP StorageWorks ESL E-Series User Manual page 154

Sense Data Values
Table 24: Sense data values (Hexadecimal) (Continued)
Sense
Key ASC ASCQ
B 80
B 80
B 8B
B 8C
B 8F
-none- 30
-none- 80
154
0B
COMMAND ABORTED BY USER
Informational message. No action is necessary.
0D
CARTRIDGE PARTIALLY GRIPPED
Issue a Move Medium command using your application software to
move the cartridge from the transfer element to an empty storage
element.
If necessary, manually clear the media, recalibrate, then inventory
the library.
C0
TRANSPORT FULL
The CLM contains a cartridge. Issue a command to retrieve the cartridge
from the CLM and place it in either a bin or a tape drive.
01
LOAD PORT LATCH FAILURE
The load port door was unlocked, but did not leave its current position
before time-out (30 seconds). This may be due to the door being stuck,
or in the case of a close operation, the operator not moving the door.
00
LIBRARY UNIT COMMAND TIMED OUT
Verify that communications to library still exists by issuing another
command.
03
CLEANING CARTRIDGE INSTALLED
Indicates that the element contains a cleaning cartridge that is not
"used-up." This is returned with the element status data, which has no
sense key.
01
DRIVE REQUIRES CLEANING
Tape drive indicates that drive needs cleaning. Clean the tape drive.
This is returned with element status data, which has no sense key.
Message Name/Description
ESL E-Series Tape Library User's Guide