Reset Button; Power Indicator; Serial Port; Ethernet Port - HP StorageWorks ESL E-Series User Manual

Reset button

To force a manual reboot of the FC interface controller, use the reset button (see
Figure 8
also select the Reboot menu option in the Command View TL, as described later
in this manual.

Power indicator

The interface controller has one power LED.

Serial port

The interface controller is equipped with one serial port. See
Figure 9
Note:
E-series library.

Ethernet port

One Ethernet port with an LED indicator is included in the interface controller.
See
ESL E-Series Tape Library User's Guide
and Figure 9). Press the button with a pen or other small object. You can
Caution: Using the Reset button during an ongoing data backup, restore, or
other data transfer process, can result in a disruption of that process and a loss
of data. Before selecting the Reset button, verify that no data is currently
transferring through the FC interface controller by visually inspecting the
Activity LEDs of all I/O ports on the FC interface controller.
Green - Power has been applied to this module
Yellow - Power-On-Self-Test (POST) in process or processor problems
for the location of the serial port.
The serial port is an HP service port not intended for customer use on the ESL
Figure 8 and Figure 9
Activity - Port activity
Link - Valid Ethernet link
for the location of the Ethernet port.
Library Overview
Figure 8 and
31