10.19 Installer Text
Siemens Building Technologies
Fire Safety & Security Products
The Installer Text setting allows the engineer to enter system information and
engineer contact information.
To program installer text:
1.
Scroll to the FULL ENGINEER> INSTALLER TEXT programming option.
2.
Press SELECT.
3.
The following configuration options are available:
System Name: used to help identify the system; use a clear and
–
descriptive name for the installation
System ID: used to help identify the installation when connected to a
–
central station (max 10 digits)
Installer Name: used for contact purposes
–
Installer Phone: used for contact purposes
–
Display Installer: setting to display installer details can during the idle
–
state
4.
Press BACK to exit the INSTALLER TEXT menu.
NOTE
The Installer contact details programmed in these menu options should also be entered on the Keypad
pull-down label on completion of the installation.
Engineer Programming Via the Keypad
85
09.2008