Sms Events - Siemens SPC4000 Installation & Configuration Manual

12.12.1 SMS Events

Siemens Building Technologies
Fire Safety & Security Products
To receive Event notifications, SMS setup must have the phone number; the
number must be enabled for SMS; and the Events must be toggled for SMS Event
notification.
Add the phone number for SMS use:
1. Scroll to the SMS EVENTS option and press
SELECT. The following configuration options
are available:
2. Add by providing phone number for receipt of
event notification (Requires three-digit country
code prefix)
Edit phone number as needed. (Within this
level is also enabling SMS and selecting
Reported Events.) Delete: Remove phone
number as needed
3. Press BACK to exit the SMS EVENTS menu.
Each user may set a maximum of five phone
numbers for SMS receipt.
Enable phone number for SMS [receipt] within SMS Events menu:
1. Scroll to the SMS EVENTS option and press
SELECT.
2. Select EDIT.
3. Using the up/down arrow keys, scroll to the
appropriate registered number and press
SELECT.
4. Scroll to ENABLE NUMBER and press
SELECT.
5. Press SELECT for ENABLED [Alternatively,
press SELECT for DISABLED.]
6. Press BACK to exit the SMS EVENTS menu.
The keypad displays UPDATED once the
setting has been saved.
User Menus Via the Keypad
...SMS EVENTS...
EXIT SELECT
...ADD...
BACK SELECT
SMS MUMBER
353____
BACK ENTER
UPDATED
...SMS EVENTS...
EXIT SELECT
...EDIT...
EXIT SELECT
...353123123...
BACK SELECT
ENABLE NUMBER
BACK SELECT
09.2008
97