Help Text - Siemens OP7 Equipment Manual

3.3

Help Text

Purpose Help text is written when configuring with ProTool and provides additional
information in the language set at the OP. Info text can be configured for
Help text can be used to convey, for example, information to the user on the
current assignment of the soft keys. Help text relating to an alarm message
may contain additional hints, for example, on the possible cause of the alarm
and how to remedy it.
Displaying help The availability of help text is indicated by the HELP LED being lit. Config-
text ured help text can be output by pressing the HELP key on the OP.
If the cursor is positioned in an input field or in an I/O field for which help
text is available (lit LED), the help text is output by pressing the HELP key.
Pressing the HELP key a second time displays help text associated with the
screen entry, if configured.
If the HELP key is pressed in a field for which help text is not available, help
text associated with the screen entry, if configured, is displayed directly.
Configured information text associated with a screen is obtained either by
pressing the HELP key in the directory when the cursor is positioned on the
corresponding screen.
Scrolling through The keys
help text
ate. The ESC key terminates display of help text, and the previous display is
shown again.
3-14
event messages and alarm messages,
screens,
screen entries,
input fields and dual I/O fields,
recipes, recipe entries,
schedulers.
and are used to scroll through help text, if appropri-
Equipment Manual OP7, OP17
Release 04/99