Table of Contents
Advertisement
Starting the System
9.2.1
Fast Programmer
9.3
Configuring Start-up Settings
40
Siemens Building Technologies
Fire Safety & Security Products
The SPC Fast Programmer is a portable storage device that provides the engineer
with the ability to upload and download configuration files in a quick and convenient
manner. Fast Programmer can be used in conjunction with he above programming
tools. For more details, refer to Section 13 Using the Fast Programmer.
The installation engineer sets the start-up configuration. These settings can be
changed at a later time. An ellipsis (...) on accompanying graphics denotes when
there is a choice of menu selection by scrolling.
To configure the system start-up settings:
1.
The first item that appears on the Keypad
is the version number of the SPC system.
The Keypad prompts the user to press a
key.
2.
Enter the date and time on the subsequent
two screens.
3.
Using the up/down arrow keys, choose the
appropriate REGION. Choose IRELAND,
EUROPE, or UK and press SELECT.
4.
Choose a type of installation: DOMESTIC
or COMMERCIAL. The Domestic setting is
appropriate for home use: houses and
apartments. Commercial setting provides
additional zone types and commercial zone
descriptions for the first eight zones.
For more details see 16.7 Appendix H:
Domestic and Commercial Mode Default
Settings
X-BUS configuration is detected.
5.
Scroll if changing configuration.
X-BUS wiring configuration is detected.
6.
Scroll if changing the wiring configuration.
The system scans for Expanders/Keypads
that are wired into the system and displays
the Expander/Keypad ID(s) number(s) that
have been added.
7.
Press NEXT for each status as well as for
relative Zones.
Start-up settings are complete.
8.
Enter the default programming code (1111)
to start configuring the system.
SPC4000
PRESS A KEY
DATE
18/08/2008
BACK
ENTER
TIME
09:21:00
BACK
ENTER
REGION
IRELAND
SELECT
TYPE
DOMESTIC
BACK
SELECT
X-BUS ID: ...MANUAL...
RESCAN
SELECT
X-BUS:
...BUS...
BACK
SELECT
[EXP./KEYPAD] ONLINE
RESCAN
SELECT
PROGRAMMIMG MODE
NEXT
09.2008
- Quick Links:
- Keypad
Hide quick links:
Advertisement
Table of Contents
