Table of Contents
Advertisement
Engineer Programming Via the Keypad
10.13.2 Defaults
10.13.3 Fast Programmer
10.13.4 SPC Pro
10.14 Isolate
82
Siemens Building Technologies
Fire Safety & Security Products
To reset users or return the system to factory default settings:
1.
Scroll to the DEFAULTS programming option.
2.
Press SELECT.
3.
Toggle between RESET USERS and FACTORY DEFAULT for preferred
setting and press SELECT.
A prompt is displayed, asking if the user is sure.
4.
Press YES to confirm the reset.
Transferring Data from the Controller (panel) to the Fast Programmer:
1.
Scroll to the FAST PROGRAMMER programming option.
2.
Press SELECT.
3.
Scroll to DATA FROM PANEL and press SELECT.
A prompt to enter the name of the configuration file is displayed.
4.
Enter name of the file and press ENTER.
The message TRANSFER OK displays to indicate that the panel configuration
has been stored to the fast programmer.
Transferring data to the Controller (panel) from the Fast Programmer
1.
Scroll to the FAST PROGRAMMER programming option.
2.
Press SELECT.
3.
Scroll to DATA TO PANEL and press SELECT.
The names of all configuration files stored on the fast programmer are
displayed.
4.
Choose the required file and press SELECT.
The message TRANSFER OK displays to indicate that the configuration file
has been stored on the Controller (panel).
To program SPC Pro options:
1.
Scroll to the SPC PRO programming option.
2.
Press SELECT.
3.
The following options are available:
Enable SPC Pro: determine if SPC Pro is enabled or disabled
–
Engineer Access: determine if engineer access is enabled or disabled
–
Password: edit the existing system password
–
4.
Press BACK to exit the SPC Pro menu.
Zones or faults on the system can be manually isolated from the Keypad. Isolating
a zone removes that zone from the system until the user de-isolates it.
09.2008
- Quick Links:
- Keypad
Hide quick links:
Advertisement
Table of Contents
