Keypad Display - Siemens SPC4000 Installation & Configuration Manual

8.1

Keypad Display

TOP LINE OF DISPLAY
In the normal state, displays the current date and time.
In Programming Mode, this line displays one of the following:
→ The programming feature to be selected
→ The current setting of the selected feature
During an alert condition, this line displays the nature of the
current alert
LEFT SOFT KEY
This key is used to select the option
presented on the left side of the bottom
line display.
Possible values are:
→
EXIT to exit programming
→
BACK to return to previous menu
MULTI-FUNCTION NAVIGATION KEY
OK The OK button acts as a SELECT key for the menu option displayed on the top line and also as an ENTER/SAVE key for data
displayed on the top line.
In Programming Mode, the right arrow key advances the user through the menus in the same way as pressing the SELECT
option (right soft key).
In data entry mode, press this key to move the cursor one position to the right.
In Programming Mode, the left arrow key returns the user to the previous menu level. Pressing this key when in the top menu
level exits the user from programming.
In data entry mode, press this key to move the cursor one position to the left.
In Programming Mode, the up arrow key moves the user to a previous programming option in the same menu level.
Continually press this key to scroll through all programming options available on the current menu level.
In alphanumeric mode, press this key over a lower case character to change the character to upper case.
In Programming Mode, the down arrow key moves the user to the next programming option in the same menu level.
Continually press this key to scroll through all programming options available on the current menu level.
In alphanumeric mode, press this key over an upper case character to change the character to lower case.
Siemens Building Technologies
Fire Safety & Security Products
BOTTOM LINE OF DISPLAY
In the normal state, this line is blank.
In Programming Mode, this line displays options available to the
user. These options align over the left and right soft keys for
selection as required.
SETUP SYSTEM
EXIT SELECT
Keypad User Interface
RIGHT SOFT KEY
This key is used to select the option
presented on the right side of the bottom
line display.
Possible values are:
→
SELECT to select the option displayed
on the top line
→
ENTER to enter the data displayed on
the top line
→
SAVE to save a setting
37
09.2008