Spc Features - Siemens SPC4000 Installation & Configuration Manual

4.1

SPC Features

Siemens Building Technologies
Fire Safety & Security Products
The following features are incorporated into the SPC4000 Controller design:
8 Inputs with configurable wiring - No End Of Line (NEOL), Single End Of Line
(SEOL), Dual End Of Line (DEOL) and Anti-masking PIR supervision (MPIR)
6 Outputs – 3 x open collector, 1 x single pole Relay, 1x External Bell and 1 x
Internal Bell
Wireless transceiver module (868 Mhz) supporting multiple wireless zones
(Optional)*
PSTN Modem module (Optional)
GSM module – Future Release (Optional)
1 x X10 Port
1 x RS232 Serial port terminal connector Interfaces
1 x USB Interface port
X-BUS Communications Interface – 1 comms channel (1A, 1B)
Front Tamper spring with tamper by-pass jumper
PSU interface – AC power in via transformer
Fast Programmer support – for fast local download of firmware
SPC Pro programming application
*These features and devices will be available with a later market package.
Product description
19
09.2008