Strobe Time; Chime Time; Dialler Delay; Soak Days - Siemens SPC4000 Installation & Configuration Manual

10.4.4 Strobe Time

10.4.5 Chime Time

10.4.6 Dialler Delay

10.4.7 Soak Days

10.4.8 Dknock Delay

Siemens Building Technologies
Fire Safety & Security Products
To set the strobe time:
1. Scroll to the STROBE TIME programming
option.
2. Press SELECT.
3. Enter the preferred time (0 - 15 mins)
4. Press SAVE to update the setting.
To set the chime time:
1. Scroll to the CHIME TIME programming option.
2. Press SELECT.
3. Enter the preferred time (0-10 sec)
4. Press SAVE to update the setting.
To set the dialler delay:
1. Scroll to the DIALER DELAY programming
option.
2. Press SELECT.
3. Enter the preferred time (0-30 sec).
4. Press SAVE to update the setting.
To set the number of soak days:
1. Scroll to the SOAK DAYS programming option.
2. Press SELECT.
3. Enter the preferred number of days (1-99).
4. Press SAVE to update the setting.
To set the dknock delay:
1. Scroll to the DKNOCK DELAY programming
option.
2. Press SELECT.
3. Enter the preferred time (0-99 sec).
4. Press SAVE to update the setting.
Engineer Programming Via the Keypad
...STROBE TIME...
BACK
15
BACK
...CHIME TIME...
BACK
2
BACK
...DIALER DELAY...
BACK
30
BACK
...SOAK DAYS...
BACK
14
BACK
...DKNOCK DELAY...
BACK
10
BACK
SELECT
(0-15) MIN
SAVE
SELECT
(0-10) SEC
SAVE
SELECT
(0-30) SEC
SAVE
SELECT
(0-99) DAY
SAVE
SELECT
(0-99) SEC
SAVE
57
09.2008