Application; System Areas; Partset A / Partset B - Siemens SPC4000 Installation & Configuration Manual

10.3.2 Application

10.3.3 System Areas

10.3.4 Partset A / Partset B

Siemens Building Technologies
Fire Safety & Security Products
To program application type:
1. Scroll to APPLICATION programming option.
2. Press SELECT and scroll to the appropriate
application setting:
Domestic: Suitable for domestic
–
installations
(see 14.2, Domestic Mode Operation)
Commercial: Suitable for commercial
–
installations
(see Section 14.1, Commercial Mode Operation)
3. Press SAVE.
The Keypad displays UPDATED momentarily.
To enable System Areas:
1. Press SELECT.
2. Toggle the setting between DISABLED and
ENABLED.
3. Press SAVE.
To rename the PARTSET A or B option:
1. Scroll to the PARTSET A or PARTSET B
programming option.
2. Press SELECT.
The option to RENAME displays.
3. Press SELECT and use the Keypad to enter
the preferred name.
4. Press ENTER to save new name.
Engineer Programming Via the Keypad
...APPLICATION...
BACK
...DOMESTIC...
BACK
...SYSTEM AREAS...
BACK
...PARTSET A...
BACK
RENAME
BACK
PARTSET
BACK
SELECT
SAVE
SELECT
SELECT
SAVE
ENTER
49
09.2008