Table of Contents
Advertisement
12.3
Inhibiting a Zone or Fault
12.4
Isolating a Zone or Fault
Siemens Building Technologies
Fire Safety & Security Products
5.
If no zones are inhibited on the system the display shows NO INHIBITS.
6.
If the user had inhibited zones on the system then each inhibited zone is
displayed briefly in turn for approximately 1 second.
7.
Press any key to return to the VIEW INHIBITS menu.
Zones or faults on the system can be manually inhibited from the Keypad.
Inhibiting a zone removes that zone from the system for the present arming
occurrence.
To inhibit a zone:
1.
Enter a valid user code.
2.
Using the up/down arrow keys, scroll to the
MENUS option and press SELECT.
3.
Scroll down to the INHIBIT option and press
SELECT.
A list of zones on the system is displayed.
4.
Toggle between NOT INHIBITED and
INHIBITED.
5.
Press SELECT to save setting.
Zones or faults on the system can be manually isolated from the Keypad. Isolating
a zone removes that zone from the system until the
user de-isolates it.
To isolate a zone:
1.
Enter a valid user code.
2.
Using the up/down arrow keys, scroll to the
MENUS option and press SELECT.
3.
Scroll down to the ISOLATE option and press
SELECT.
4.
Scroll down to the ZONES option and press
SELECT.
A list of zones on the system is displayed.
5.
Select the required zone and toggle the setting
from NOT ISOLATED to ISOLATED using the
up/down arrow keys.
6.
Press SELECT to save setting.
User Menus Via the Keypad
...ZONES...
EXIT
SELECT
...ZONE 1...
EXIT
SELECT
...INHIBITED...
BACK
SELECT
...MENUS...
EXIT
SELECT
...ISOLATE...
EXIT
SELECT
...ZONES...
BACK
SELECT
...ZONE 1...
BACK
SELECT
...ISOLATED...
BACK
SELECT
09.2008
91
- Quick Links:
- Keypad
Hide quick links:
Advertisement
Table of Contents
