Appendix I: Wiring Of X10 Interface To The Spc Controller; Appendix J: Sia Codes - Siemens SPC4000 Installation & Configuration Manual

Appendix
16.8

Appendix I: Wiring of X10 Interface to the SPC Controller

16.9

Appendix J: SIA Codes

118
Siemens Building Technologies
Fire Safety & Security Products
1 RJ11
2 TX (4)
3 GND (1)
4 RX (4)
5 RX (1)
6 GND (5)
7 TX (8)
8 RJ45
Fig. 20 X10 Wiring to the Controller
SIA Code Short Description
AR AC Restoral
AT AC Trouble
BA Burglary Alarm
BB Burglary Bypass
BC Burglary Cancel
BD Swinger Trouble
BE Swinger Trouble Restore
BJ Burglary Restore
BR Burglary Alarm Trouble Restore
BT Burglary Trouble
BU Burglary Un-Bypass
BV Burglary Verified
BX Burglary Text
CD Close Delinquent
CF Forced Close
CG Close Area
CI Fail to Close
CL Closing Report
CP Automatic Closing
Details
AC Mains power restored
AC Mains power fault
Burglary zone violated while armed
Burglary zone inhibited or disabled
Short or Disconnect on alarm zone
Zone inhibit/disable removed
nd
2 Burglary zone activated causing Verified
Alarm
System has been Part Set/Armed
System/Area Fail to Set due to open zone or
Service required etc.
System has been fully Set /Armed
09.2008