Table of Contents
Advertisement
Siemens Building Technologies
Fire Safety & Security Products
Before changing PIN or new SIM card, ensure all
power sources are disconnected (AC Mains and
battery) or card will not be activated.
To configure a PSTN modem:
1.
Enter the Engineer Programming code
(default 1111).
2.
Press SELECT for FULL ENGINEER
programming.
3.
Using the up/down arrow keys, scroll to
COMMUNICATION> MODEMS
programming option.
4.
Press SELECT.
5.
Toggle between PRIMARY and BACKUP for
correct modem slot and press SELECT.
The ENABLE MODEM option displays.
6.
Press SELECT and toggle between
ENABLED and DISABLED for the preferred
setting and press SELECT.
Modem is enabled/disabled and UPDATED
displays.
1.
Scroll from this modem menu to MODEM
STATUS.
2.
Press SELECT to view the status of the
modem.
The FIRMWARE VERSION option is
displayed.
3.
Press SELECT to view the version of
firmware.
4.
Select GSM/PSTN PIN to enter the PIN code
for the SIM card.
5.
Select ANSWER MODE to enter the manner
the modem answers incoming calls.
6.
Select SMS ENABLE to enable SMS text
messages to mobile phones.
NOTE
When a PIN is programmed on the GSM module, it is sent to the SIM card. It is also sent every time
the GSM module is powered up (this is the same operation as a GSM phone).
If an incorrect PIN is sent to the SIM card three times, the SIM is blocked. If this happens, it is
recommended that the SIM card be removed and unblocked using a mobile phone. If the SIM card is
being changed on the GSM module or if a SIM card is being used with a PIN, it is recommended that
the PIN code be programmed before it is placed in the SIM holder, to ensure that incorrect PINs are
not sent to it.All power should be removed (AC Mains and Battery) when loading the SIM card into the
SIM holder.
Engineer Programming Via the Keypad
FULL ENGINEER
EXIT
...COMMUNICATION...
BACK
...MODEMS...
BACK
...PRIMARY...
BACK
...ENABLE MODEM...
BACK
ENABLED
BACK
UPDATED
...MODEM STATUS...
BACK
..FIRMWARE VERSION...
BACK
...PSTN PIN...
BACK
...ANSWER MODE...
BACK
...SMS ENABLE...
BACK
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
45
09.2008
- Quick Links:
- Keypad
Hide quick links:
Advertisement
Table of Contents
