Displaying The Module Status Window; Setting The Ntsc Setup Pedestal On The Monitor Analog Output; Displaying Closed Captions On The Monitor Analog Output (7711Hdc-Sn-Eaes4 Version Only) - evertz 7700 Manual

7700 MultiFrame Manual
7711HDC HD Broadcast Quality Down Converter

6.10.1. Displaying the module Status Window

Utilities
Mon Status Window
On
Off

6.10.2. Setting the NTSC Setup Pedestal on the Monitor Analog Output

Output Picture
Mon NTSC Setup
Pedestal
Off
On
6.10.3. Displaying Closed Captions on the Monitor Analog Output
(7711HDC-SN-EAES4 version only)
Output Picture
Mon Caption
Decoder
Off
On
7711HDC - 32
This menu item is used to display the module status window. This display
shows the current module configuration at a glance. The display will be
similar to the following:
Video = 1080i/59.94
Video motion = moving
Video Delay = xx frms, yy lines, zz samples (d.ddd msec)
Genlock = present
Audio group 1 = present
Audio group 2 = present
Audio group 3 = present
Audio group 4 = present
Captions = present
Time Code = present
This control determines how the NTSC Setup Pedestal will be applied on
the Monitor Analog Output.
present when operating in Japan.
Set the control to On to apply the Setup pedestal to all lines of the active
picture.
Set the control to Off to remove the NTSC Setup Pedestal from all lines.
This control determines whether the closed caption decoder on the Monitor
Analog Output will display captions encoded on line 21 according to EIA
608B. The Captions item in the VANC Data Processing menu must also be
set to On in order to display Captions on the caption decoder.
Set the control to Off to disable the monitor output closed caption decoder.
Set the control to On to enable the monitor output closed caption decoder.
Revision 1.1
The NTSC setup pedestal should not be