Troubleshooting - Abus Secvest User Manual

16. Troubleshooting

16.1 Manual restart (switching off and switching back on)
S/W >=1.01.00
This is helpful for some problems, to reset the alarm panel to a defined initial state. All the settings and
configurations are retained.
Note
A restart is only possible when
all partitions are "disarmed" and
the alarm panel has completed all important communications, transmissions and actions.
There are three ways to do this
[1] In the user menu on the alarm panel when logged in as administrator
[2] In the user menu on the web server when logged in as administrator
[3] On the alarm panel by pressing the "Up" and "Down" navigation keys
[1] Alarm panel user menu
User menu -> Configuration -> Functions -> Restart alarm panel
You can use this to restart the alarm panel manually.
Note
This menu item is only visible to the administrator, i.e. the administrator must be logged into the system.
Select "Restart alarm panel" by pressing the "Change" menu key.
You are prompted for confirmation.
Press the "Yes" menu key.
At this point you can still cancel the restart.
Press "Back".
[2] Web server user menu
User menu -> Configuration -> Functions -> Restart alarm panel
You can use this to restart the alarm panel manually.
Note
This menu item is only visible to the administrator, i.e. the administrator must be logged into the system.
16. Troubleshooting