Abus Secvest User Manual page 30

⋅ "On"
Note: LCD backlighting and all backlighting of the keys are always turned on. The wakeup function is
deactivated.In case of a power failure, the illumination switches to "When active" in order not to use
unnecessary electricity from the battery.
⋅ "When active"
Note: Wakeup function is activated. The illumination is first turned on when a button is pressed (first
touch). No other action results from a "first touch". From the second touch on, the keypad functions as
normal. The user can then touch one of the visible symbols (house/padlocks). At the first touch, the alarm
panel will not perform the functions associated with these buttons.At first, only the illumination is turned
on.
Backlighting for menu keys/backlighting for arm keys/backlighting for number keys
Only visible if the key front is installed. The same setup as for "LCD backlighting" applies here for the
backlighting of the menu keys, arm/disarm keys and number keys. Set the desired lighting of the keys
for menu navigation here.
Note:If the touch front is installed, these 3 menus are hidden.
Zone name announcement
Your detectors can be equipped with an additional audio message if desired. In consultation with your
specialist installation contractor, the detectors are usually already given a name, for example "MC living
room" for "magnetic contact in living room". This text can be recorded and saved here individually for each
detector, with approx. 2 s allocated for each detector. If detector "MC living room" triggers an alarm, for
example, the text not only appears on the display when the alarm is disarmed, but the name of the alarm
is also audibly played back. Do not forget to select "Playback" after recording the detector text to check what
was recorded and ensure it is correct and intelligible.
Voice message: 2 second announcement for each zone
If this function is activated:User menu -> Configuration -> Functions -> Zone name announcement ->
Enabled on and zone names are spoken, an additional announcement is made:
For an open zone
"The alarm system cannot be armed" + "<Zone name>"
For several open zones, the zone with the lowest zone number will be announced in addition.
10. User menu
turns the illumination on in order to keep the complete touch front lit
constantly.
means that the illumination of the complete touch front only remains on for
approx. 30 s after each use. After 30 s it automatically turns off.