Arming & Disarming - Abus Secvest User Manual

13.3 Arming & disarming
The following button can be used to arm and disarm the system. The symbols have the following meanings:
Internally arm system
1
Disarm system
2
Arm system
3
13. Operation via web browser
1
These commands can be implemented
individually for each sub-area. First
click on the sub-area in question and
then on the corresponding arm/disarm
key:
If there is an error in the system, the
information on this is displayed as
follows (in this example a magnetic
contact is open):
If you click on "Arm" or "Internally arm"
in this case, you will fi nd that it is not
possible – the padlock button remains
"open". You must fi rst resolve the error
and then arm the system. If you have
successfully armed the system via the
web interface, the display looks like the
example shown here in the following
(a sub-area has been armed in our
example).
If an alarm has been triggered within the
armed sub-area, the display looks like the
example in the fi gure on the left .
2
3
48 | 49