Individual Sub-Areas; Internal Arming - Abus Secvest User Manual

Hide thumbs Also See for Secvest:

Table of Contents

8.6 Individual sub-areas

In addition to the option of arming the complete system and sub-areas, the system also off ers the option

of "internal arming". This type of arming is preferred when occupants are home and wish to arm just the

perimeter of the premises. Certain detectors indoors (such as motion detectors) are disabled so that occupants

can move freely within the building. A practical example here is application in a private home.

The following options are available for internal arming:

8. Arming and disarming the system

1. If you wish to arm two sub-areas, proceed as follows: enter your user code.

Using the

arrow keys, select the two sub-areas to be armed. The

selections

are visually highlighted. Set the selected sub-areas to the

open padlock symbol via the "Change" function. Leave the sub-areas you do

not wish to arm "empty". In this case the menu looks like the example given

in the fi gure on the left .

2. Click on "Done" and system sub-areas 1 & 3 are armed, while sub-areas 2 & 4

remain disarmed. Aft er the arming time, the Secvest display then looks like

the example given in the fi gure on the left .

3. To arm only sub-area 2, repeat the steps as described above. Select the

individual sub-areas, click on "Change" and set the value for the sub-area to

"empty" as shown in the fi gure. The sub-area to be armed (sub-area 2 in this

case) should be set to "active" using the "Change" function. Click on "Done"

to arm just this sub-area.

Option 1:

Press the

key to internally arm the system with just one touch. The quick

arm option must be enabled in advance by the specialist installation contractor.

Option 2:

Enter a user code to arm the system. Click and hold "Change" until the house

symbol

appears. Click on "Done" and the system is "internally armed".

You can now move freely around the house even though motion detectors

may be installed. The perimeter of the premises is armed, so that an intruder

attempting to break in from outside triggers an alarm.

Table of Contents