Abus Secvest User Manual page 29

Bell
If the "Door bell" property is configured for a detector (e.g. for a magnetic contact at the entrance of
a business), the disarmed alarm panel triggers a tone similar to a door bell. This function must be configured
by the specialist installation contractor. This indicates that someone has entered the business premises. If you
wish to disable this function for a certain time period, it can be disabled here.
Voice message
In this menu you can disable the audible messages on the alarm panel (e.g. "Please note the message on
the display").
Activity monitor
If the "Activity monitoring" property is configured for a detector (e.g. a motion detector in the hallway),
the function of a motion detector can be "reversed". This function must be configured by the specialist
installation contractor. If the function is reversed, an emergency call alarm is sent after a defined time period
in which no movement has been detected. This function is used to monitor older, vulnerable members of
the household. After a defined time period, an emergency call is sent when the regular "presence detection"
at a previously designated motion detector has not triggered. This allows vulnerable members of the household
who generally spend their time moving around a specific room to receive help quickly if their "presence" is
not detected after a certain time due to a fainting spell or something similar.
Display contrast
Change the contrast of the Secvest display here.
Backlighting brightness
Change the display brightness setting. You can select "low", "medium" or "high".
LCD backlighting / backlighting
LCD backlighting
Only visible if the key front is installed. Here you can set the illumination of the display.
⋅ "Off"
⋅ "On"
⋅ "When active"
Backlighting
Only visible if the touch front is installed. Here you can set the illumination of the complete touch
front. LCD backlighting, menu keys, arm keys and number keys
10. User menu
turns the illumination off
web access enabled
web access enabled
28 | 29