Abus Secvest User Manual page 32

Dynamic backlighting
Only visible if the touch front is installed.
The brightness regulation is an option for dynamic light control.
If the "Dynamic backlighting" menu item is set to "Off", it will behave similarly to the Secvest with a key front
with a fixed "high", "medium" or "low" value.
If the "Dynamic backlighting" menu item is set to "On", the backlighting will adjust proportionally to the
ambient light.
The high, medium and low settings still have an influence on the level and degree of the increase.
The minimum and maximum values are:
Backlighting brightness
High
Medium
Low
Cleaning mode
Only visible if the touch front is installed.
"Off" deactivates the cleaning mode.
"On" enables the cleaning mode.
The cleaning mode (factory default "On") is started when the left and right navigation keys are pressed.
The keys are disabled for a total of 35 s. You can now clean the front without accidentally triggering an action.
The display shows "Cleaning mode". An acoustic warning signal and notification on the display during the
last 5 s signalise that the keys will shortly function as normal. The display will show: "End of cleaning mode"
Note:It is not possible to use the alarm panel when it is in cleaning mode; this is especially true for the
double key functionality (fire, intrusion, medical emergency, care).
Cleaning mode will stop if an alarm occurs.
If an alarm occurs during cleaning mode, the cleaning mode will immediately be aborted and the keypad
will return to normal use at once.
If a nursing emergency call timer starts, the cleaning mode will be aborted.
A 30 s "abort time" begins when the nursing emergency call alarm is pressed.
If an inactivity warning timer starts, the cleaning mode will be aborted.
A 2 minute "abort time" begins when the care activity monitor establishes inactivity.
It is not possible to start the cleaning mode when an alarm is present.
10. User menu
Minimum values
15%
10%
2%
Maximum values
100%
50%
11%