Table of Contents
Advertisement
7.4
Hot water delivery
• Place the cup under the hot water nozzle;
• press the hot water key
of water;
• To stop delivery in advance, press the hot water key
again
.
i
When the machine is cool (pressure below 0,6 bar)
P
rog
the delivery of hot water is not active.
S
top
13
17
7.5
Regulation of the hot water
temperature
To change the temperature of the outlet hot water,
proceed as follows:
• remove the grilles and the drain tub (9);
• rotate the nozzle (A):
- to increase the temperature turn clockwise
- to decrease the temperature turn counter-clockwise
9
i
By completely turning the knob clockwise, only
steam will come out of the hot water dispenser.
!
Do not touch the hot water nozzle: contact with
the hot water may be harmful to people, animals
or property.
32
, and wait for the delivery
P
rog
S
top
A
+
-
7.6
Steam delivery
Immerge the steam nozzle into the beverage to be
heated and turn the tap knob (5) counterclockwise: the
steam coming out of the nozzle (8) will be proportional
to the opening of the tap.
13
OFF
!
The use of the steam dispensing point (steam
nozzle) must always be preceded by the
performance of the condensation draining
operation for at least 2 seconds.
!
Leave the steam nozzle immerged in the milk
only for the time required for heating.
Do not open the steam tap with the steam spout
immersed in milk while the machine is off.
!
Carefully operate the steam nozzle using the
anti-burn rubber (6): contact with the steam
may be harmful to people, animals or property.
To keep the steam nozzle tips in perfect working
order, it is advisable to carry out a brief dry
i
delivery after each use. Keep the tips clean at
all times using a cloth dampened in lukewarm
water. Handle the nozzle with utmost caution
due to the hazard resulting from the presence of
high-temperature steam.
5
6
8
MILK
Technical manual
Advertisement
Table of Contents
