Table of Contents
Advertisement
Stand-By mode
Mode
Timer
Delay
Depending on the mode, the display shows the
option to be adjusted:
TIMER
When the group is in stand-by mode (STOP/PROG
LED flashes), if you press the STOP/PROG key for 3
seconds, you can reset the group to its ideal temperature
(this takes about 2 minutes) and dispense doses.
If doses are not dispensed within the programmed
time (Delay), the system will go back to stand-by.
To program the time, select "Timer" and set the
desired "Delay" in minutes.
Stand-By mode
Mode
Timer
Threshold
AUTO
With this mode you can set the number of dispensed
beverages in one hour (Threshold); below that value
the system places each delivery group in stand-by (little
work).
Select "Auto" and set the required "Threshold".
42
Auto
Auto
12.8
Autosteamer option
To enable or disable the autosteamer
and adjust its temperature, proceed as
follows:
Autosteamer
• Pressing "Autosteamer", displays the adjustment
screen.
• Set the desired temperature.
Autosteamer
Yes
Setpont T1
Enable or disable the autosteamer (if you select NO,
the "Autosteamer" keyboard will be excluded).
Autosteamer
Setpont T2
Setpont T3
If enabled, you can set the desired temperature (50
to 80 °C) for each button.
The 3 temperature values (T1,T2 e T3) can be
programmed singularly and refer to the 3 functions on
the autosteamer keyboard:
T1.
T2.
No
T3.
Technical manual
Advertisement
Table of Contents
