Table of Contents
Advertisement
16
Cleaning
For perfect cleaning and efficiency of the appliance,
several simple cleaning operations are necessary on
the functional parts and accessories as well as the body
panels. The indications given here are applicable for
normal use of the coffee machine. If the machine is used
continuously, then cleaning should be performed more
frequently.
Before cleaning the machine, turn it off the machine
and let it cool off.
Cleaning
CAPP. MAKER
Clean several times a day as indicated in the chapter
Cappuccino", especially if used continuously.
FILTERS and FILTER HOLDERS
Clean the filter holders daily leaving them to soak in
hot water overnight so that the fatty coffee deposits
can dissolve and then rinse under running water.
Weekly perform the same washing for 10 minutes in
warm water and cleaning agent.
Failure to clean the filter holders will compromise
the quality of the coffee and the filterholder correct
operation.
Caution: only immerse the filter holder cup.
Do not immerse the handle.
56
Cleaning
CUP TRAYS
Extract the grids from the housing;
Clean with a cloth dampened in lukewarm water.
Reinsert the grids in their housing.
BODY
Clean the panels of the body with a cloth dampened
in lukewarm water. Do not use abrasive detergents
which may scratch the surface of the body.
Remove the drip tray and cup holder grill and wash
with hot water. During the cleaning operations pay
attention to the edges and protruding parts.
STEAM NOZZLE - MILK FOAMER - AUTOSTEAMER
Keep the nozzle clean at all times using a cloth
XXX
dampened in lukewarm water.
DISPENSING UNIT
Carry out the washing of the groups as indicated in
Chapter "Group washing" and follow the instruc-
tions below:
• use the blind portafilter;
• pour the detergent on the solid filter and attach
the filter holder;
• Carry out a series of deliveries until the water
comes out clean;
• remove the filter holder from the unit and carry
out at least one delivery so as to eliminate any
detergent residues.
X
PERFORATED DISK
and CONTAINMENT
RING
Loosen the screw (A)
and remove the
perforated disk (B)
and containment ring (C) from the delivery group.
Wash with hot water.
X
X
X
X
C
B
X
A
Technical manual
Advertisement
Table of Contents
