Dispensing Steam; Dispensing Hot Water - Astoria Plus4YouTS SAEP Use And Maintenance Manual

Plus4YouTS

6.6 Dispensing steam

Carefully move the steam nozzle using the specific
anti-scald rubber grip (6).
Do not direct the steam towards hands or other
parts of the body. Do not touch the steam nozzles with bare
hands; use the appropriate PPE.
Before using the steam nozzle, the condensation
draining operation must always be carried out for
at least 2 seconds.
• Immerse the steam nozzle into
the liquid to be heated.
• Rotate the valve knob clockwise.
• The quantity of steam will be
proportional to how open the
valve is.
• To stop dispensing, turn the
valve's knob clockwise.
To optimally froth the milk, follow these simple rules:
• Only heat the amount of milk that you intend to use; once
heated, it will have to be completely poured out of the jug
and cannot be reheated.
• Froth the milk starting with a temperature of about 4°C.
To keep the steam nozzle tips in perfect working
order, it is advisable to carry out a brief dry dis-
pensing run after each use. Keep the tips clean at
all times using a cloth dampened in lukewarm water. Only
leave the steam nozzle immersed in the milk for the time
needed to heat it.
Do not open the steam valve with
the steam wand immersed in milk
and the machine switched off, as the
latter would suck milk into the pipes.
48 216
of
6
MILK

6.7 Dispensing hot water

6.7.1 Dispensing hot water
Danger of scalding. Do not direct hot water to-
wards hands or other parts of the body. Do not
touch the hot water nozzle with bare hands; use
the appropriate PPE.
• Place the pot under the hot water
spout.
• Press the button and wait for
the hot water to be dispensed.
P
rog
S
top
• To stop dispensing ahead of time,
press the button again.
P
rog
S
top
Hot water cannot be dispensed when the machine
is cool (pressure below 0.6 bar). To change the tem-
perature of the dispensed water, call out the Tech-
nician.
P
rog
S
top
User Manual